Home » Appliances » Caterpillar 3406 Specs (Power | Consumption)

Caterpillar 3406 Specs (Power | Consumption)

The Caterpillar 3406 generator is listed with standby output of 240 kW, Diesel fuel, 50 Hz operation, 120/208 V, 208/240 V output, Three phase, and rated current of 56.7 / 64 / 71 A.

Caterpillar Generator Specifications

Generator • Diesel • 50 Hz • Three phase

Standby power: 240 kWVoltage options: 120/208 V, 208/240 VRated current: 56.7 / 64 / 71 ADry weight: 2,989 lb (1,356 kg)

Key specifications

240 kW Standby power
Diesel Fuel
120/208 V, 208/240 V Voltage options
Three phase Phase
56.7 / 64 / 71 A Rated current
2,989 lb (1,356 kg) Dry weight
50 Hz Frequency

Useful generator charts

Charts are shown only when this model has enough usable source data.

Fuel consumption by load
How fuel use changes as generator load increases.
25% load

6.5 gal/hr

50% load

10.2 gal/hr

75% load

14.2 gal/hr

100% load

18.3 gal/hr

Power-to-weight
Standby output per 1,000 lb of dry weight compared with a fixed industry reference for this output class.
This model

80.3 kW

Typical reference

43 kW

High for this output class
Power output
Low 240 kW High 240 kW
Standby

240 kW

Prime

240 kW

Model spec snapshot
Representative numeric specifications from this generator.
240 kWStandby
2,989.47 lbWeight

How the Caterpillar 3406 compares

Low, Typical and High are fixed generator-industry reference bands set by standby-output class. They do not change based on the models contained in this CSV.

Standby power
240 kW
Typical range
Typical: 275 kW
Dry weight
2,989 lb
Low range
Typical: 7,011 lb
Oil capacity
9.01 gal
Low range
Typical: 11.89 gal
Standby power240 kW · Typical
Low 150 kWTypical 275 kWHigh 400 kW

Falls within the typical industry reference range for generators in this standby-output class.

Dry weight2,989 lb · Low
Low 2,998 lbTypical 7,011 lbHigh 13,999 lb

Falls toward the low end of the fixed industry reference range for generators in this standby-output class.

Oil capacity9.01 gal · Low
Low 4.76 galTypical 11.89 galHigh 30.38 gal

Falls toward the low end of the fixed industry reference range for generators in this standby-output class.

This model Typical industry reference

Generator information

Manufacturer Caterpillar
Model 3406
Generator type Generator
Fuel Diesel
Frequency 50 Hz

Electrical output

Standby power 240 kW
Prime power 240 kW
Standby kVA 500.0
Voltage options 120/208 V, 208/240 V
Phase Three phase
Rated current 56.7 / 64 / 71 A
Power factor 0.8
Circuit breaker 90 / 100 / 110 A

Engine, cooling and controls

Engine model Caterpillar 3406C
Engine displacement 891 cu in (14.6 L)
Aspiration / cooling Petroleum
Rated engine speed 2100 rpm
Engine oil capacity 10 gal (38 L)
Engine coolant capacity 24 gal (90.8 L)
Oil capacity 9.01 gal (34.1 L)
Coolant capacity 6.21 gal (23.5 L)
Maximum ambient 170 °F (77 °C)
Controller EMCP
Alternator Caterpillar SR4 (4-pole, Class H insulation)
Emissions IMO compliant

Physical specifications

Dry weight 2, 989 lb (1, 356 kg)
Dimensions (L × W × H) 64.3 × 2.5 × 32.8 in (1634 × 64 × 833 mm)

Fuel consumption

Standby 6.5 gal/h (24.6 L/h) @ 25%; 10.2 gal/h (38.5 L/h) @ 50%; 14.2 gal/h (53.9 L/h) @ 75%; 18.3 gal/h (69.4 L/h) @ 100%
Prime 251.0 gal/h (20.7 L/h) @ 25%; 5.5 gal/h (35.0 L/h) @ 40%; 19.5 gal/h @ 50%; 9.2 gal/h @ 75%; 16.3 gal/h @ 80%; 36.7 gal/h @ 100%; 20.8 gal/h

Maintenance and service parts

Engine oil Interval: 250 hr; Capacity: 38.0 L
Oil filter Interval: 250 hr
Fuel filter Interval: 1000 hr
Air filter Part number: 612506; Interval: 250 hr; Specification: Replace air filter at each oil change and every 250 hours or as needed.
Coolant Interval: 1000 hr; Capacity: 20.8 L

Disclaimer: Specifications should be verified against the official owner’s or service manual and confirmed on the Caterpillar USA website.

Ernie Lo

Ernie Lo is a qualified web designer and web developer. He works as an IT support technician and website manager at Benleigh Vending, and he also fixes vending machines.

Recent Posts