Caterpillar D25 Specs (Power | Consumption)

The Caterpillar D25 generator is listed with standby output of 25 kW, 60 Hz operation, 208 V output, and Three phase.

Caterpillar Generator Specifications

Generator • 60 Hz • Three phase

Standby power: 25 kWVoltage options: 208 VDry weight: 1,074 lb (487 kg)

Key specifications

25 kW Standby power

208 V Voltage options

Three phase Phase

1,074 lb (487 kg) Dry weight

60 Hz Frequency

Useful generator charts

Charts are shown only when this model has enough usable source data.

Power-to-weight

Standby output per 1,000 lb of dry weight compared with a fixed industry reference for this output class.

This model

23.3 kW

Typical reference

33 kW

Low for this output class

Power output

Low 22 kW High 25 kW

Standby

25 kW

Prime

22 kW

Model spec snapshot

Representative numeric specifications from this generator.

25 kWStandby

1,073.65 lbWeight

How the Caterpillar D25 compares

Low, Typical and High are fixed generator-industry reference bands set by standby-output class. They do not change based on the models contained in this CSV.

Standby power

25 kW

Typical range

Typical: 22.5 kW

Dry weight

1,074 lb

Typical range

Typical: 992 lb

Oil capacity

19.81 gal

High range

Typical: 1.85 gal

Standby power25 kW · Typical

Low 15 kWTypical 22.5 kWHigh 30 kW

Falls within the typical industry reference range for generators in this standby-output class.

Dry weight1,074 lb · Typical

Low 496 lbTypical 992 lbHigh 1,808 lb

Falls within the typical industry reference range for generators in this standby-output class.

Oil capacity19.81 gal · High

Low 0.79 galTypical 1.85 galHigh 3.7 gal

Falls toward the high end of the fixed industry reference range for generators in this standby-output class.

This model Typical industry reference

Generator information

Manufacturer	Caterpillar
Model	D25
Generator type	Generator
Frequency	60 Hz

Electrical output

Standby power	25 kW
Prime power	22 kW
Standby kVA	31.0
Voltage options	208 V
Phase	Three phase

Engine, cooling and controls

Engine model	Caterpillar C2.2
Engine displacement	134 cu in (2.2 L)
Aspiration / cooling	Naturally Aspirated
Rated engine speed	1800 rpm
Engine oil capacity	19.8 gal (75 L)
Engine coolant capacity	19.8 gal (75 L)
Oil capacity	19.8 gal (75 L)
Coolant capacity	0.95 gal (3.6 L)
Alternator	P3528A
Emissions	EPA Tier 4 Interim

Physical specifications

Dry weight	1, 074 lb (487 kg)
Dimensions (L × W × H)	74.5 × 28.1 × 54.4 in (1893 × 714 × 1381 mm)

Fuel consumption

Standby	2.6 gal/h (9.8 L/h)
Prime	2.3 gal/h (8.9 L/h) @ 100%

Disclaimer: Specifications should be verified against the official owner’s or service manual and confirmed on the Caterpillar USA website.