Caterpillar DE110E2 Specs (Power | Consumption)

The Caterpillar DE110E2 generator is listed with standby output of 88 kW, diesel fuel, 50 Hz operation, 7 available voltage configurations, and Three phase.

Caterpillar Generator Specifications

Generator • diesel • 50 Hz • Three phase

Standby power: 88 kWVoltage options: 7 configurationsDry weight: 2,679 lb (1,215 kg)

Key specifications

88 kW Standby power

diesel Fuel

7 configurations Voltage options

Three phase Phase

2,679 lb (1,215 kg) Dry weight

50 Hz Frequency

Useful generator charts

Charts are shown only when this model has enough usable source data.

Fuel consumption by load

How fuel use changes as generator load increases.

50% load

3.7 gal/hr

75% load

4.8 gal/hr

100% load

6.3 gal/hr

Estimated runtime by load

Calculated from the listed 66 gal fuel capacity and fuel-consumption data.

50% load

17.8 hr

75% load

13.8 hr

100% load

10.5 hr

Power-to-weight

Standby output per 1,000 lb of dry weight compared with a fixed industry reference for this output class.

This model

32.9 kW

Typical reference

38 kW

Typical for this output class

Power output

Low 80 kW High 88 kW

Standby

88 kW

Prime

80 kW

How the Caterpillar DE110E2 compares

Low, Typical and High are fixed generator-industry reference bands set by standby-output class. They do not change based on the models contained in this CSV.

Standby power

88 kW

Typical range

Typical: 105 kW

Dry weight

2,679 lb

Typical range

Typical: 2,998 lb

Oil capacity

2.11 gal

Low range

Typical: 5.81 gal

Standby power88 kW · Typical

Low 60 kWTypical 105 kWHigh 150 kW

Falls within the typical industry reference range for generators in this standby-output class.

Dry weight2,679 lb · Typical

Low 1,301 lbTypical 2,998 lbHigh 5,997 lb

Falls within the typical industry reference range for generators in this standby-output class.

Oil capacity2.11 gal · Low

Low 2.11 galTypical 5.81 galHigh 14.53 gal

Falls toward the low end of the fixed industry reference range for generators in this standby-output class.

This model Typical industry reference

Generator information

Manufacturer	Caterpillar
Model	DE110E2
Generator type	Generator
Fuel	diesel
Frequency	50 Hz

Electrical output

Standby power	88 kW
Prime power	80 kW
Standby kVA	110.0
Voltage options	200/115 V, 220/110 V, 220/127 V, 230/115 V, 380/220 V, 415/240 V, 400/230 V
Phase	Three phase
Power factor	0.8

Engine, cooling and controls

Engine model	Caterpillar C4.4
Engine displacement	269 cu in (4.4 L)
Aspiration / cooling	Turbocharged Air To Air Charge Cooled
Rated engine speed	1500 rpm
Engine oil capacity	2.11 gal (8 L)
Engine coolant capacity	4.62 gal (17.5 L)
Oil capacity	2.11 gal (8 L)
Coolant capacity	4.62 gal (17.5 L)
Maximum ambient	122 °F (50 °C)
Controller	EMCP 4.1
Alternator	R2253L4 (Class H insulation)
Emissions	EU stage II

Physical specifications

Dry weight	2, 679 lb (1, 215 kg)
Dimensions (L × W × H)	82.2 × 44.1 × 54.1 in (2089 × 1120 × 1375 mm)

Fuel system and runtime

Fuel tank	66 gal (250 L)

Fuel consumption

Standby	3.7 gal/h (14.1 L/h) @ 50%; 4.8 gal/h (18.0 L/h) @ 75%; 6.3 gal/h (23.9 L/h) @ 100%
Prime	3.3 gal/h (12.6 L/h) @ 50%; 4.4 gal/h (16.5 L/h) @ 75%; 5.7 gal/h (21.7 L/h) @ 100%

Maintenance and service parts

Engine oil	Interval: 500 hr; Specification: Cat TDTO or equivalent; Capacity: 8.4
Oil filter	Interval: 500 hr; Specification: Spin-on type
Fuel filter	Interval: 500 hr; Specification: Duplex cartridge type
Air filter	Interval: 1000 hr; Specification: Dry cartridge type
Coolant	Specification: Water cooled oil cooler

Disclaimer: Specifications should be verified against the official owner’s or service manual and confirmed on the Caterpillar USA website.