Home » Appliances » Cummins Onan 175 DFE Specs (Power | Fuel Consumption)

Cummins Onan 175 DFE Specs (Power | Fuel Consumption)

The Cummins Onan 175 DFE generator is listed with standby output of 175 kW, diesel fuel, 60 Hz operation, 4 available voltage configurations, and Three phase.

Cummins Onan Generator Specifications

Generator • diesel • 60 Hz • Three phase

Standby power: 175 kWVoltage options: 4 configurationsDry weight: 5,655 lb (2,565 kg)

Key specifications

175 kW Standby power
diesel Fuel
4 configurations Voltage options
Three phase Phase
5,655 lb (2,565 kg) Dry weight
60 Hz Frequency

Useful generator charts

Charts are shown only when this model has enough usable source data.

Power-to-weight
Standby output per 1,000 lb of dry weight versus similar-output Cummins Onan models.
This model

30.9 kW

Peer average

45.1 kW

24th percentile
Model spec snapshot
Representative numeric specifications from this generator.
175 kWStandby
5,654.86 lbWeight

How the Cummins Onan 175 DFE compares

This compares the supplied numeric specification with Cummins Onan generators in the same broad standby-power class where enough comparable data exists.

Standby power
175 kW
25% below avg
25th percentile
Dry weight
5,655 lb
5% below avg
49th percentile
Oil capacity
8.19 gal
7% above avg
57th percentile
Standby power175 kW
Low 150 kWAverage 232.8 kWHigh 354.6 kW

About 25% below the similar-output Cummins Onan average. Around the 25th percentile for this field.

Dry weight5,655 lb
Low 2,199 lbAverage 5,923 lbHigh 12,467 lb

About 5% below the similar-output Cummins Onan average. Around the 49th percentile for this field.

Oil capacity8.19 gal
Low 1.81 galAverage 7.66 galHigh 13.73 gal

About 7% above the similar-output Cummins Onan average. Around the 57th percentile for this field.

This model Peer average

Generator information

Manufacturer Cummins Onan
Model 175 DFE
Generator type Generator
Fuel diesel
Frequency 60 Hz

Electrical output

Standby power 175 kW
Standby kVA 219.0
Voltage options 208 V, 240 V, 277 V, 480 V
Phase Three phase
Power factor 0.8

Engine, cooling and controls

Engine model Cummins/Onan NT-855-G2
Aspiration / cooling turbocharged
Rated engine speed 1800 rpm
Engine oil capacity 8.19 gal (31 L)
Engine coolant capacity 14 gal (53 L)
Oil capacity 8.19 gal (31 L)
Coolant capacity 14 gal (53 L)
Maximum ambient 95 °F (35 °C)
Controller Electronic (EFC)
Alternator Cummins/Onan UR (3-phase)

Physical specifications

Dry weight 5, 655 lb (2, 565 kg)

Battery

Battery group BCI-8D
Battery voltage 12 V
Battery quantity 2

Maintenance and service parts

Engine oil Interval: 50 hr; Specification: SAE 10W-30, 15W-40, or 20W-40 depending on temperature; Capacity: 31.0 liters
Oil filter Interval: 250 hr; Specification: As specified for Cummins engines
Fuel filter Interval: 1000 hr; Specification: Replace when dirty
Air filter Interval: 250 hr
Coolant Interval: 50 hr; Specification: Ethylene glycol based coolant; Capacity: 53
Coolant filter Specification: Clean or replace as required. See Figure 7 for filter location and replacement procedure.
Belt Interval: 50 hr

Disclaimer: Specifications should be verified against the official owner’s or service manual and confirmed on the Cummins North America generator website.

Ernie Lo

Ernie Lo is a qualified web designer and web developer. He works as an IT support technician and website manager at Benleigh Vending, and he also fixes vending machines.

Recent Posts