Home » Appliances » Cummins Onan C440 D5 Specs (Power | Fuel Consumption)

Cummins Onan C440 D5 Specs (Power | Fuel Consumption)

The Cummins Onan C440 D5 generator is listed with standby output of 352 kW, 50 Hz operation, 50 V output, and A (U) / B (V) / C (W).

Cummins Onan Generator Specifications

Generator • 50 Hz • A (U) / B (V) / C (W)

Standby power: 352 kWVoltage options: 50 VDry weight: 5,357 lb (2,430 kg)

Key specifications

352 kW Standby power
50 V Voltage options
A (U) / B (V) / C (W) Phase
5,357 lb (2,430 kg) Dry weight
50 Hz Frequency

Useful generator charts

Charts are shown only when this model has enough usable source data.

Power-to-weight
Standby output per 1,000 lb of dry weight versus similar-output Cummins Onan models.
This model

65.7 kW

Peer average

45.1 kW

89th percentile
Power output
Low 320 kW High 352 kW
Standby

352 kW

Prime

320 kW

Model spec snapshot
Representative numeric specifications from this generator.
352 kWStandby
5,357.23 lbWeight

How the Cummins Onan C440 D5 compares

This compares the supplied numeric specification with Cummins Onan generators in the same broad standby-power class where enough comparable data exists.

Standby power
352 kW
51% above avg
96th percentile
Dry weight
5,357 lb
10% below avg
41st percentile
Oil capacity
9.7 gal
27% above avg
71st percentile
Standby power352 kW
Low 150 kWAverage 232.8 kWHigh 354.6 kW

About 51% above the similar-output Cummins Onan average. Around the 96th percentile for this field.

Dry weight5,357 lb
Low 2,199 lbAverage 5,923 lbHigh 12,467 lb

About 10% below the similar-output Cummins Onan average. Around the 41st percentile for this field.

Oil capacity9.7 gal
Low 1.81 galAverage 7.66 galHigh 13.73 gal

About 27% above the similar-output Cummins Onan average. Around the 71st percentile for this field.

This model Peer average

Generator information

Manufacturer Cummins Onan
Model C440 D5
Generator type Generator
Frequency 50 Hz

Electrical output

Standby power 352 kW
Prime power 320 kW
Standby kVA 440.0
Voltage options 50 V
Phase A (U) / B (V) / C (W)

Engine, cooling and controls

Engine model Cummins/Onan NTA855-G7
Engine displacement 915 cu in (15 L)
Aspiration / cooling Turbocharged
Engine coolant capacity 5.49 gal (20.8 L)
Oil capacity 9.7 gal (36.7 L)
Coolant capacity 15.3 gal (58 L)
Maximum ambient 140 °F (60 °C)
Controller PowerCommand

Physical specifications

Dry weight 5, 357 lb (2, 430 kg)
Dimensions (L × W × H) 132.7 × 59.1 × 83.3 in (3370 × 1500 × 2115 mm)

Battery

Battery voltage 24 V
Battery quantity 2

Fuel system and runtime

Fuel tank 132.1 gal (500 L)

Fuel consumption

Standby 98 gal/h

Maintenance and service parts

Engine oil Interval: 100 hr; Capacity: 10.0 gallons
Oil filter Interval: 1000 hr
Fuel filter Interval: 500 hr
Air filter Interval: 1000 hr; Specification: If the engine is equipped with an oil bath type air cleaner, fill to the level indicated with oil of the same viscosity as used in the crankcase. However, a non-detergent (straight mineral) oil is recommended.
Coolant Interval: 5000 hr; Specification: For units which use either a radiator or heat exchanger (city water cooled), fill the cooling system with clean soft water, The standard radiator and block capacity is 21 U.S. gallons. Use a good rust and scale inhibitor. If there is any possibility of a radiator cooled plant being exposed to freezing temperatures, use antifreeze with ethylene glycol base as instructed in the Cummins manual.; Capacity: 80.63 L

Disclaimer: Specifications should be verified against the official owner’s or service manual and confirmed on the Cummins North America generator website.

Ernie Lo

Ernie Lo is a qualified web designer and web developer. He works as an IT support technician and website manager at Benleigh Vending, and he also fixes vending machines.

Recent Posts