Home » Appliances » Cummins Onan C70 N6 Specs (Power | Fuel Consumption)

Cummins Onan C70 N6 Specs (Power | Fuel Consumption)

The Cummins Onan C70 N6 generator is listed with standby output of 70 kW, Natural gas/Propane fuel, 60 Hz operation, 5 available voltage configurations, and Single phase / Three phase.

Cummins Onan Generator Specifications

Generator • Natural gas/Propane • 60 Hz • Single phase / Three phase

Standby power: 70 kWVoltage options: 5 configurationsDry weight: 2,449 lb (1,111 kg)

Key specifications

70 kW Standby power
Natural gas/Propane Fuel
5 configurations Voltage options
Single phase / Three phase Phase
2,449 lb (1,111 kg) Dry weight
60 Hz Frequency

Useful generator charts

Charts are shown only when this model has enough usable source data.

Power-to-weight
Standby output per 1,000 lb of dry weight versus similar-output Cummins Onan models.
This model

28.6 kW

Peer average

31.8 kW

34th percentile
Model spec snapshot
Representative numeric specifications from this generator.
70 kWStandby
2,449.34 lbWeight

How the Cummins Onan C70 N6 compares

This compares the supplied numeric specification with Cummins Onan generators in the same broad standby-power class where enough comparable data exists.

Standby power
70 kW
25% below avg
24th percentile
Dry weight
2,449 lb
31% below avg
27th percentile
Oil capacity
3.99 gal
4% below avg
46th percentile
Standby power70 kW
Low 60 kWAverage 93 kWHigh 144.5 kW

About 25% below the similar-output Cummins Onan average. Around the 24th percentile for this field.

Dry weight2,449 lb
Low 1,881 lbAverage 3,569 lbHigh 6,592 lb

About 31% below the similar-output Cummins Onan average. Around the 27th percentile for this field.

Oil capacity3.99 gal
Low 1.22 galAverage 4.16 galHigh 8.19 gal

About 4% below the similar-output Cummins Onan average. Around the 46th percentile for this field.

This model Peer average

Generator information

Manufacturer Cummins Onan
Model C70 N6
Generator type Generator
Fuel Natural gas/Propane
Frequency 60 Hz

Electrical output

Standby power 70 kW
Standby kVA 88.0
Voltage options 120/240 V, 120/208 V, 277/480 V, 347/600 V, 127/220 V
Phase Single phase / Three phase

Engine, cooling and controls

Engine model Cummins/Onan QSJ5.9G
Engine displacement 360 cu in (5.9 L)
Aspiration / cooling Naturally aspirated or turbocharged
Rated engine speed 1800 rpm
Engine oil capacity 3.99 gal (15.1 L)
Engine coolant capacity 4.23 gal (16 L)
Oil capacity 3.99 gal (15.1 L)
Coolant capacity 4.23 gal (16 L)
Maximum ambient 122 °F (50 °C)
Controller Enovations 4G LDI, PC 1.1, PC 2.3, PCC1.1, PowerCommand 1.1
Alternator UC224D-G or UC274C-F
Emissions EPA

Physical specifications

Dry weight 2, 449 lb (1, 111 kg)
Dimensions (L × W × H) 98 × 40 × 58 in (2489 × 1016 × 1473 mm)

Battery

Battery group 34
Battery cranking 850 CCA
Battery voltage 12 V

Fuel consumption

Prime 7.77 L/h @ 100%

Maintenance and service parts

Engine oil Interval: 250 hr; Specification: Replace engine oil and filters. Refer to the Engine Oil section for the procedure.
Fuel filter Interval: 24 hr; Specification: Check fuel lines and hoses: Visually check for leaks, worn or damaged hoses. To replace, contact your authorized distributor.
Air filter Interval: 250 hr
Coolant Interval: 500 hr; Specification: Starts to open within 2 °F (1 °C) of 180 °F (82 °C); Fully open within 2 °F (1 °C) of 203 °F (95 °C); Flow valve and flange clearance (minimum): 0.26 in (6.6 mm)
Belt Interval: 24 hr; Specification: Checking drive belt condition and tension: Visually check belt for evidence of wear or slippage. To replace, contact your authorized distributor.

Disclaimer: Specifications should be verified against the official owner’s or service manual and confirmed on the Cummins North America generator website.

Ernie Lo

Ernie Lo is a qualified web designer and web developer. He works as an IT support technician and website manager at Benleigh Vending, and he also fixes vending machines.

Recent Posts