Home » Appliances » Cummins Onan DFBF Specs (Power | Fuel Consumption)

Cummins Onan DFBF Specs (Power | Fuel Consumption)

The Cummins Onan DFBF generator is listed with standby output of 275 kW, Diesel fuel, 60 Hz operation, 275 V output, and Single phase.

Cummins Onan Generator Specifications

Generator • Diesel • 60 Hz • Single phase

Standby power: 275 kWVoltage options: 275 VDry weight: 7,251 lb (3,289 kg)

Key specifications

275 kW Standby power
Diesel Fuel
275 V Voltage options
Single phase Phase
7,251 lb (3,289 kg) Dry weight
60 Hz Frequency

Useful generator charts

Charts are shown only when this model has enough usable source data.

Power-to-weight
Standby output per 1,000 lb of dry weight versus similar-output Cummins Onan models.
This model

37.9 kW

Peer average

45.1 kW

44th percentile
Power output
Low 250 kW High 275 kW
Standby

275 kW

Prime

250 kW

Model spec snapshot
Representative numeric specifications from this generator.
275 kWStandby
7,251 lbWeight

How the Cummins Onan DFBF compares

This compares the supplied numeric specification with Cummins Onan generators in the same broad standby-power class where enough comparable data exists.

Standby power
275 kW
18% above avg
69th percentile
Dry weight
7,251 lb
22% above avg
77th percentile
Oil capacity
10.57 gal
38% above avg
89th percentile
Standby power275 kW
Low 150 kWAverage 232.8 kWHigh 354.6 kW

About 18% above the similar-output Cummins Onan average. Around the 69th percentile for this field.

Dry weight7,251 lb
Low 2,199 lbAverage 5,923 lbHigh 12,467 lb

About 22% above the similar-output Cummins Onan average. Around the 77th percentile for this field.

Oil capacity10.57 gal
Low 1.81 galAverage 7.66 galHigh 13.73 gal

About 38% above the similar-output Cummins Onan average. Around the 89th percentile for this field.

This model Peer average

Generator information

Manufacturer Cummins Onan
Model DFBF
Generator type Generator
Fuel Diesel
Frequency 60 Hz

Electrical output

Standby power 275 kW
Prime power 250 kW
Standby kVA 344.0
Voltage options 275 V
Phase Single phase
Power factor 0.8

Engine, cooling and controls

Engine model Cummins/Onan NT855-G6
Engine displacement 854 cu in (14 L)
Aspiration / cooling turbocharged
Rated engine speed 1800 rpm
Engine oil capacity 10.6 gal (40 L)
Engine coolant capacity 17 gal (64.4 L)
Oil capacity 10.6 gal (40 L)
Coolant capacity 17 gal (64.4 L)
Maximum ambient 104 °F (40 °C)
Controller PowerCommand, PowerCommand 2100, PowerCommand 3100, PowerCommand 3100 (PCC)

Physical specifications

Dry weight 7, 251 lb (3, 289 kg)
Dimensions (L × W × H) 142 × 50 × 63.6 in (3607 × 1270 × 1615 mm)

Battery

Battery group 8D
Battery cranking 975 CCA
Battery voltage 12 V
Battery quantity 2

Fuel system and runtime

Fuel tank 11.1 gal (42 L)

Fuel consumption

Standby 6.9 gal/h (77.3 L/h) @ 1%; 20.4 gal/h @ 100%
Prime 25 gal/h @ 1%

Maintenance and service parts

Engine oil Interval: 100 hr; Capacity: 42.0 gallons
Oil filter Interval: 1000 hr
Fuel filter Interval: 500 hr
Air filter Interval: 1000 hr; Specification: If the engine is equipped with an oil bath type air cleaner, fill to the level indicated with oil of the same viscosity as used in the crankcase. However, a non-detergent (straight mineral) oil is recommended.
Coolant Interval: 5000 hr; Specification: For units which use either a radiator or heat exchanger (city water cooled), fill the cooling system with clean soft water, The standard radiator and block capacity is 21 U.S. gallons. Use a good rust and scale inhibitor. If there is any possibility of a radiator cooled plant being exposed to freezing temperatures, use antifreeze with ethylene glycol base as instructed in the Cummins manual.; Capacity: 80.63 L

Disclaimer: Specifications should be verified against the official owner’s or service manual and confirmed on the Cummins North America generator website.

Ernie Lo

Ernie Lo is a qualified web designer and web developer. He works as an IT support technician and website manager at Benleigh Vending, and he also fixes vending machines.

Recent Posts