The Cummins Onan DFCC generator is listed with standby output of 350 kW, diesel fuel, 60 Hz operation, 11 available voltage configurations, and Three phase.
Generator • diesel • 60 Hz • Three phase
Key specifications
Useful generator charts
Charts are shown only when this model has enough usable source data.
8 gal/hr
13.4 gal/hr
19 gal/hr
24.4 gal/hr
1.4 hr
0.8 hr
0.6 hr
0.5 hr
48.3 kW
45.1 kW
350 kW
315 kW
How the Cummins Onan DFCC compares
This compares the supplied numeric specification with Cummins Onan generators in the same broad standby-power class where enough comparable data exists.
About 50% above the similar-output Cummins Onan average. Around the 91st percentile for this field.
About 22% above the similar-output Cummins Onan average. Around the 77th percentile for this field.
About 31% above the similar-output Cummins Onan average. Around the 76th percentile for this field.
Generator information
| Manufacturer | Cummins Onan |
|---|---|
| Model | DFCC |
| Generator type | Generator |
| Fuel | diesel |
| Frequency | 60 Hz |
Electrical output
| Standby power | 350 kW |
|---|---|
| Prime power | 315 kW |
| Standby kVA | 438.0 |
| Voltage options | 110/190 V, 115/200 V, 120/208 V, 127/220 V, 139/240 V, 120/240 V, 220/380 V, 240/415 V, 254/440 V, 277/480 V, 347/600 V |
| Phase | Three phase |
Engine, cooling and controls
| Engine model | Cummins/Onan NTA855-G3 |
|---|---|
| Engine displacement | 854 cu in (14 L) |
| Aspiration / cooling | Turbocharged and Aftercooled |
| Rated engine speed | 1800 rpm |
| Engine oil capacity | 10 gal (37.9 L) |
| Engine coolant capacity | 13.5 gal (51.1 L) |
| Oil capacity | 10 gal (37.9 L) |
| Coolant capacity | 13.5 gal (51.1 L) |
| Maximum ambient | 122 °F (50 °C) |
| Controller | PowerCommand, PowerCommand 2100, PowerCommand 3100, PowerCommand 3100 (PCC) |
Physical specifications
| Dry weight | 7, 251 lb (3, 289 kg) |
|---|---|
| Dimensions (L × W × H) | 142 × 50 × 63.6 in (3607 × 1270 × 1615 mm) |
Battery
| Battery group | 8D |
|---|---|
| Battery cranking | 975 CCA |
| Battery voltage | 12 V |
| Battery quantity | 2 |
Fuel system and runtime
| Fuel tank | 11.1 gal (42 L) |
|---|
Fuel consumption
| Standby | 8.0 gal/h (30.0 L/h) @ 25%; 13.4 gal/h (51.0 L/h) @ 50%; 19.0 gal/h (72.0 L/h) @ 75%; 24.4 gal/h (92.0 L/h) @ 100% |
|---|---|
| Prime | 7.6 gal/h (29.0 L/h) @ 25%; 12.5 gal/h (47.0 L/h) @ 50%; 17.3 gal/h (65.0 L/h) @ 75%; 22.4 gal/h (85.0 L/h) @ 100% |
Maintenance and service parts
| Engine oil | Interval: 100 hr; Capacity: 10.0 gallons |
|---|---|
| Oil filter | Interval: 1000 hr |
| Fuel filter | Interval: 500 hr |
| Air filter | Interval: 1000 hr; Specification: If the engine is equipped with an oil bath type air cleaner, fill to the level indicated with oil of the same viscosity as used in the crankcase. However, a non-detergent (straight mineral) oil is recommended. |
| Coolant | Interval: 5000 hr; Specification: For units which use either a radiator or heat exchanger (city water cooled), fill the cooling system with clean soft water, The standard radiator and block capacity is 21 U.S. gallons. Use a good rust and scale inhibitor. If there is any possibility of a radiator cooled plant being exposed to freezing temperatures, use antifreeze with ethylene glycol base as instructed in the Cummins manual.; Capacity: 80.63 L |
Disclaimer: Specifications should be verified against the official owner’s or service manual and confirmed on the Cummins North America generator website.