Home » Appliances » Cummins Onan DQKAA Specs (Power | Fuel Consumption)

Cummins Onan DQKAA Specs (Power | Fuel Consumption)

The Cummins Onan DQKAA generator is listed with standby output of 1750 kW, Diesel fuel, 60 Hz operation, 17 available voltage configurations, and A (U) / B (V) / C (W).

Cummins Onan Generator Specifications

Generator • Diesel • 60 Hz • A (U) / B (V) / C (W)

Standby power: 1750 kWVoltage options: 17 configurationsDry weight: 33,579 lb (15,231 kg)

Key specifications

1750 kW Standby power
Diesel Fuel
17 configurations Voltage options
A (U) / B (V) / C (W) Phase
33,579 lb (15,231 kg) Dry weight
60 Hz Frequency

Useful generator charts

Charts are shown only when this model has enough usable source data.

Fuel consumption by load
How fuel use changes as generator load increases.
25% load

46.5 gal/hr

50% load

82 gal/hr

75% load

107.3 gal/hr

100% load

141.3 gal/hr

Power-to-weight
Standby output per 1,000 lb of dry weight versus similar-output Cummins Onan models.
This model

52.1 kW

Peer average

55.6 kW

53rd percentile
Power output
Low 1,600 kW High 1,750 kW
Standby

1,750 kW

Prime

1,600 kW

Model spec snapshot
Representative numeric specifications from this generator.
1,750 kWStandby
33,578.61 lbWeight

How the Cummins Onan DQKAA compares

This compares the supplied numeric specification with Cummins Onan generators in the same broad standby-power class where enough comparable data exists.

Standby power
1,750 kW
4% below avg
51st percentile
Dry weight
33,579 lb
11% above avg
63rd percentile
Oil capacity
26.42 gal
49% below avg
24th percentile
Standby power1,750 kW
Low 1,000 kWAverage 1,831.9 kWHigh 3,562 kW

About 4% below the similar-output Cummins Onan average. Around the 51st percentile for this field.

Dry weight33,579 lb
Low 71 lbAverage 30,152 lbHigh 65,094 lb

About 11% above the similar-output Cummins Onan average. Around the 63rd percentile for this field.

Oil capacity26.42 gal
Low 0.28 galAverage 51.88 galHigh 105.14 gal

About 49% below the similar-output Cummins Onan average. Around the 24th percentile for this field.

This model Peer average

Generator information

Manufacturer Cummins Onan
Model DQKAA
Generator type Generator
Fuel Diesel
Frequency 60 Hz

Electrical output

Standby power 1750 kW
Prime power 1600 kW
Standby kVA 2188.0
Voltage options 60 V, 219/380 V, 254/440 V, 277/480 V, 347/600 V, 2400/4160 V, 7200/1247 V, 7620/1320 V, 7970/1380 V, 50 V, 220/380 V, 230/400 V, 240/415 V, 1905/3300 V, 3640/6300 V, 3810/6600 V, 6350/1100 V
Phase A (U) / B (V) / C (W)

Engine, cooling and controls

Engine model Cummins/Onan QSK60
Engine displacement 3, 674 cu in (60.2 L)
Aspiration / cooling industrial diesel
Rated engine speed 1800 rpm
Engine oil capacity 26.4 gal (100 L)
Engine coolant capacity 11.1 gal (42 L)
Oil capacity 26.4 gal (100 L)
Controller PowerCommand, PowerCommand digital

Physical specifications

Dry weight 33, 579 lb (15, 231 kg)
Dimensions (L × W × H) 243.1 × 99.8 × 119.8 in (6175 × 2534 × 3043 mm)

Battery

Battery cranking 2200 CCA

Fuel consumption

Standby 46.5 gal/h (176.0 L/h) @ 25%; 82.0 gal/h (311.0 L/h) @ 50%; 107.3 gal/h (407.0 L/h) @ 75%; 141.3 gal/h (535.0 L/h) @ 100%
Prime 43.4 gal/h (164.0 L/h) @ 25%; 75.1 gal/h (285.0 L/h) @ 50%; 100.6 gal/h (381.0 L/h) @ 75%; 124.1 gal/h (470.0 L/h) @ 100%

Maintenance and service parts

Engine oil Interval: 500 hr; Specification: not specified; Capacity: 334
Oil filter Part number: F60-1500; Interval: 240 hr; Specification: Cummins OE filter
Fuel filter Interval: 1680 hr; Specification: Two stage spin-on fuel filter and water separator system. Stage 1 has a three element 7 micron filter and stage 2 has a three element 3 micron filter.
Air filter Interval: 1000 hr; Specification: Dry replaceable element
Coolant Interval: 7304 hr; Specification: not specified; Capacity: 4000
Belt Part number: B60-1500; Interval: 3360 hr; Specification: Cummins OE belt

Disclaimer: Specifications should be verified against the official owner’s or service manual and confirmed on the Cummins North America generator website.

Ernie Lo

Ernie Lo is a qualified web designer and web developer. He works as an IT support technician and website manager at Benleigh Vending, and he also fixes vending machines.

Recent Posts