Cummins Onan DQKAD Specs (Power | Fuel Consumption)

The Cummins Onan DQKAD generator is listed with standby output of 1750 kW, Diesel fuel, 60 Hz operation, 9 available voltage configurations, and Three phase.

Cummins Onan Generator Specifications

Generator • Diesel • 60 Hz • Three phase

Standby power: 1750 kWVoltage options: 9 configurationsDry weight: 35,675 lb (16,182 kg)

Key specifications

1750 kW Standby power

Diesel Fuel

9 configurations Voltage options

Three phase Phase

35,675 lb (16,182 kg) Dry weight

60 Hz Frequency

Useful generator charts

Charts are shown only when this model has enough usable source data.

Power-to-weight

Standby output per 1,000 lb of dry weight versus similar-output Cummins Onan models.

This model

49.1 kW

Peer average

55.6 kW

37th percentile

Power output

Low 1,600 kW High 1,750 kW

Standby

1,750 kW

Prime

1,600 kW

Model spec snapshot

Representative numeric specifications from this generator.

1,750 kWStandby

35,675.2 lbWeight

How the Cummins Onan DQKAD compares

This compares the supplied numeric specification with Cummins Onan generators in the same broad standby-power class where enough comparable data exists.

Standby power

1,750 kW

4% below avg

51st percentile

Dry weight

35,675 lb

18% above avg

72nd percentile

Oil capacity

73.97 gal

43% above avg

74th percentile

Standby power1,750 kW

Low 1,000 kWAverage 1,831.9 kWHigh 3,562 kW

About 4% below the similar-output Cummins Onan average. Around the 51st percentile for this field.

Dry weight35,675 lb

Low 71 lbAverage 30,152 lbHigh 65,094 lb

About 18% above the similar-output Cummins Onan average. Around the 72nd percentile for this field.

Oil capacity73.97 gal

Low 0.28 galAverage 51.88 galHigh 105.14 gal

About 43% above the similar-output Cummins Onan average. Around the 74th percentile for this field.

This model Peer average

Generator information

Manufacturer	Cummins Onan
Model	DQKAD
Generator type	Generator
Fuel	Diesel
Frequency	60 Hz

Electrical output

Standby power	1750 kW
Prime power	1600 kW
Standby kVA	2187.0
Voltage options	220/380 V, 240/416 V, 255/440 V, 7200/1247 V, 277/480 V, 347/600 V, 2400/4160 V, 7620/1320 V, 7970/1380 V
Phase	Three phase

Engine, cooling and controls

Engine model	Cummins/Onan QSK60-G6 NR2
Engine displacement	3, 674 cu in (60.2 L)
Aspiration / cooling	Turbocharged and low temperature aftercooled
Rated engine speed	1800 rpm
Engine oil capacity	88.2 gal (334 L)
Engine coolant capacity	130 gal (492 L)
Oil capacity	74 gal (280 L)
Coolant capacity	141.9 gal (537 L)
Maximum ambient	114 °F (46 °C)
Controller	PowerCommand 3.3, PowerCommand digital
Emissions	EPA NSPS Stationary Emergency Tier 2

Physical specifications

Dry weight	35, 675 lb (16, 182 kg)
Dimensions (L × W × H)	266.1 × 97.6 × 121.9 in (6759 × 2479 × 3096 mm)

Battery

Battery voltage	24 V

Fuel consumption

Standby	274.0 gal/h (1037.0 L/h) @ 0%; 42.3 gal/h (160.0 L/h) @ 1%; 73.0 gal/h (276.0 L/h); 98.3 gal/h (372.0 L/h); 120.6 gal/h (457.0 L/h)
Prime	135.0 gal/h (385.0 L/h) @ 0%; 39.5 gal/h (150.0 L/h) @ 1%; 67.9 gal/h (257.0 L/h); 90.1 gal/h (341.0 L/h); 112.3 gal/h (425.0 L/h)

Maintenance and service parts

Engine oil	Interval: 500 hr; Specification: not specified; Capacity: 334
Oil filter	Part number: F60-1500; Interval: 240 hr; Specification: Cummins OE filter
Fuel filter	Interval: 1680 hr; Specification: Two stage spin-on fuel filter and water separator system. Stage 1 has a three element 7 micron filter and stage 2 has a three element 3 micron filter.
Air filter	Interval: 1000 hr; Specification: Dry replaceable element
Coolant	Interval: 7304 hr; Specification: not specified; Capacity: 4000
Belt	Part number: B60-1500; Interval: 3360 hr; Specification: Cummins OE belt

Disclaimer: Specifications should be verified against the official owner’s or service manual and confirmed on the Cummins North America generator website.