Cummins Onan P9500df Specs (Power | Fuel Consumption)

The Cummins Onan P9500df generator is listed with Gas/LPG fuel, 60 Hz operation, 120/240 V output, Single phase, and sound level of 74.0 dBA.

Cummins Onan Generator Specifications

Generator • Gas/LPG • 60 Hz • Single phase

Voltage options: 120/240 VDry weight: 194 lb (88 kg)

Key specifications

Gas/LPG Fuel

120/240 V Voltage options

Single phase Phase

194 lb (88 kg) Dry weight

74.0 dBA Sound level

60 Hz Frequency

Useful generator charts

Charts are shown only when this model has enough usable source data.

Fuel consumption by load

How fuel use changes as generator load increases.

25% load

16 gal/hr

50% load

0.6 gal/hr

100% load

0.9 gal/hr

Estimated runtime by load

Calculated from the listed 6.6 gal fuel capacity and fuel-consumption data.

25% load

0.4 hr

50% load

11 hr

100% load

7.3 hr

Model spec snapshot

Representative numeric specifications from this generator.

194.01 lbWeight

74 dBASound

How the Cummins Onan P9500df compares

This compares the supplied numeric specification with Cummins Onan generators in the same broad standby-power class where enough comparable data exists.

Dry weight

194 lb

98% below avg

7th percentile

Sound level

74 dBA

In line with avg

57th percentile

Oil capacity

0.29 gal

98% below avg

5th percentile

Dry weight194 lb

Low 71 lbAverage 11,314 lbHigh 61,575 lb

About 98% below the similar-output Cummins Onan average. Around the 7th percentile for this field.

Sound level74 dBA

Low 51 dBAAverage 75.5 dBAHigh 107.4 dBA

Very close to the similar-output Cummins Onan average. Around the 57th percentile for this field.

Oil capacity0.29 gal

Low 0.16 galAverage 17.18 galHigh 100.39 gal

About 98% below the similar-output Cummins Onan average. Around the 5th percentile for this field.

This model Peer average

Generator information

Manufacturer	Cummins Onan
Model	P9500df
Generator type	Generator
Fuel	Gas/LPG
Frequency	60 Hz

Electrical output

Prime power	7 kW
Voltage options	120/240 V
Phase	Single phase
Circuit breaker	20 A

Engine, cooling and controls

Engine model	Cummins/Onan Onan
Engine displacement	26 cu in (0.42 L)
Aspiration / cooling	OHV 4-stroke
Rated engine speed	3600 rpm
Engine oil capacity	0.29 gal (1.1 L)
Oil capacity	0.29 gal (1.1 L)
Maximum ambient	104 °F (40 °C)
Controller	VFT Data Center
Alternator	Brushed
Emissions	EPA

Physical specifications

Dry weight	194 lb (88 kg)
Dimensions (L × W × H)	40.7 × 26.3 × 26.3 in (1033 × 667 × 667 mm)
Sound level	74.0 dBA

Fuel system and runtime

Fuel tank	6.6 gal (25 L)

Fuel consumption

Standby	16.0 gal/h (2.27 L/h) @ 25%; 0.6 gal/h (3.41 L/h) @ 50%; 0.9 gal/h @ 100%
Prime	39 gal/h @ 25%; 50%; 100%; 6500%

Maintenance and service parts

Engine oil	Interval: 50 hr; Specification: SAE 10W30; Capacity: 1.16 qt
Oil filter	Part number: A064D593; Interval: 500 hr; Specification: Change
Fuel filter	Part number: A064N124; Interval: 1000 hr; Specification: Check/Clean
Air filter	Part number: A064D487; Interval: 500 hr; Specification: Check, Clean*
Coolant	Interval: 1000 hr; Specification: replace
Belt	Interval: 500 hr; Specification: inspect/replace

Disclaimer: Specifications should be verified against the official owner’s or service manual and confirmed on the Cummins North America generator website.