The Generac GUARDIAN Series – 10 kW compressor is listed with standby output of 10 kW, 60 Hz operation, 240 V output, Single phase, rated current of 37.5 A, and sound level of 63 dBA @ 75 ft (23 m).
Generator • 60 Hz • Single phase
Key specifications
Visual model specs
Built only from this model’s supplied generator specifications.
How the Generac GUARDIAN Series – 10 kW compares
This compares the supplied numeric specification with Generac generators in the same broad standby-power class where enough comparable data exists.
About 22% above the similar-output Generac average. Around the 71st percentile for this field.
About 20% below the similar-output Generac average. Around the 21st percentile for this field.
About 12% below the similar-output Generac average. Around the 67th percentile for this field.
Very close to the similar-output Generac average. Around the 27th percentile for this field.
About 19% below the similar-output Generac average. Around the 51st percentile for this field.
Generator information
| Manufacturer | Generac |
|---|---|
| Model | GUARDIAN Series – 10 kW |
| Generator type | Generator |
| Frequency | 60 Hz |
Electrical output
| Standby power | 10 kW |
|---|---|
| Voltage options | 240 V |
| Phase | Single phase |
| Rated current | 37.5 A |
| Power factor | 1 |
Engine, cooling and controls
| Oil capacity | 0.42 gal (1.6 L) |
|---|---|
| Controller | Nexus Smart Switch |
Physical specifications
| Dry weight | 386 lb (175 kg) |
|---|---|
| Dimensions (L × W × H) | 27.2 × 13.5 × 7.1 in (692 × 343 × 180 mm) |
| Sound level | 63 dBA @ 75 ft (23 m) |
Disclaimer: Specifications should be verified against the official owner’s manual and confirmed on the Generac USA website.