The Generac MCG1000MT2 compressor is listed with standby output of 1000 kW, 60 Hz operation, 277/480 V output, Three phase, and rated current of 1503 A.
Generator • 60 Hz • Three phase
Key specifications
Visual model specs
Built only from this model’s supplied generator specifications.
1,000 kW
900 kW
How the Generac MCG1000MT2 compares
This compares the supplied numeric specification with Generac generators in the same broad standby-power class where enough comparable data exists.
About 32% below the similar-output Generac average. Around the 19th percentile for this field.
About 13% below the similar-output Generac average. Around the 29th percentile for this field.
About 11% above the similar-output Generac average. Around the 50th percentile for this field.
Generator information
| Manufacturer | Generac |
|---|---|
| Model | MCG1000MT2 |
| Generator type | Generator |
| Frequency | 60 Hz |
Electrical output
| Standby power | 1000 kW |
|---|---|
| Prime power | 900 kW |
| Standby kVA | 1250.0 |
| Voltage options | 277/480 V |
| Phase | Three phase |
| Rated current | 1503 A |
| Power factor | 0.8 |
Engine, cooling and controls
| Oil capacity | 52.8 gal (200 L) |
|---|---|
| Controller | DSE 8610 |
| Alternator | Marathon 741RSL8045 (Class H insulation) |
| Emissions | 2 |
Battery
| Battery group | 8D |
|---|---|
| Battery cranking | 1100 CCA |
| Battery voltage | 24 V |
| Battery quantity | 4 |
Fuel system and runtime
| Fuel tank | 1, 360 gal (5, 148 L) |
|---|
Disclaimer: Specifications should be verified against the official owner’s manual and confirmed on the Generac USA website.