The Generac MD600 MPS compressor is listed with standby output of 600 kW, Diesel fuel, 60 Hz operation, 277/480 V, 600 V output, and Three phase.
Generac Generator Specifications
Generator • Diesel • 60 Hz • Three phase
Standby power: 600 kWVoltage: 277/480 V, 600 V
Key specifications
600 kWStandby power
DieselFuel
277/480 V, 600 VVoltage
Three phasePhase
60 HzFrequency
Visual model specs
Built only from this model’s supplied generator specifications.
Fluid capacities
Low 11.1 gal High 34.61 gal
Oil
11.1 gal
Coolant
34.61 gal
How the Generac MD600 MPS compares
This compares the supplied numeric specification with Generac generators in the same broad standby-power class where enough comparable data exists.
Standby power
600 kW
In line with avg
57th percentile
Oil capacity
11.1 gal
40% below avg
44th percentile
Standby power600 kW
Low 400 kWAverage 595.9 kWHigh 900 kW
Very close to the similar-output Generac average. Around the 57th percentile for this field.
Oil capacity11.1 gal
Low 7.13 galAverage 18.49 galHigh 47.55 gal
About 40% below the similar-output Generac average. Around the 44th percentile for this field.
This model Peer average
Generator information
| Manufacturer | Generac |
|---|---|
| Model | MD600 MPS |
| Generator type | Generator |
| Fuel | Diesel |
| Frequency | 60 Hz |
Electrical output
| Standby power | 600 kW |
|---|---|
| Voltage options | 277/480 V, 600 V |
| Phase | Three phase |
| Power factor | 0.8 |
| Circuit breaker | 1000 A |
Engine, cooling and controls
| Oil capacity | 11.1 gal (42 L) |
|---|---|
| Coolant capacity | 34.6 gal (131 L) |
| Maximum ambient | 122 °F (50 °C) |
| Controller | PowerManager Digital Platform (PM-DCP) |
| Alternator | Marathon MagnaMax PMG 572RSL4028 |
Battery
| Battery voltage | 12 V |
|---|---|
| Battery quantity | 2 |
Disclaimer: Specifications should be verified against the official owner’s manual and confirmed on the Generac USA website.