Home » Appliances » Generac MG450 Specs (Power | Voltage | Weight)

Generac MG450 Specs (Power | Voltage | Weight)

The Generac MG450 compressor is listed with standby output of 450 kW, Natural Gas fuel, 60 Hz operation, 277/480 V, 346/600 V output, and Three phase.

Generac Generator Specifications

Generator • Natural Gas • 60 Hz • Three phase

Standby power: 450 kWVoltage: 277/480 V, 346/600 V

Key specifications

450 kWStandby power
Natural GasFuel
277/480 V, 346/600 VVoltage
Three phasePhase
60 HzFrequency

Visual model specs

Built only from this model’s supplied generator specifications.

Power output
Low 405 kW High 450 kW
Standby

450 kW

Prime

405 kW

Fluid capacities
Low 7.93 gal High 15.51 gal
Oil

7.93 gal

Coolant

15.51 gal

How the Generac MG450 compares

This compares the supplied numeric specification with Generac generators in the same broad standby-power class where enough comparable data exists.

Standby power
450 kW
24% below avg
23rd percentile
Oil capacity
7.93 gal
57% below avg
12th percentile
Standby power450 kW
Low 400 kWAverage 595.9 kWHigh 900 kW

About 24% below the similar-output Generac average. Around the 23rd percentile for this field.

Oil capacity7.93 gal
Low 7.13 galAverage 18.49 galHigh 47.55 gal

About 57% below the similar-output Generac average. Around the 12th percentile for this field.

This model Peer average

Generator information

Manufacturer Generac
Model MG450
Generator type Generator
Fuel Natural Gas
Frequency 60 Hz

Electrical output

Standby power 450 kW
Prime power 405 kW
Standby kVA 563.0
Voltage options 277/480 V, 346/600 V
Phase Three phase
Power factor 0.8

Engine, cooling and controls

Oil capacity 7.93 gal (30 L)
Coolant capacity 15.5 gal (58.7 L)
Maximum ambient 122 °F (50 °C)
Controller Power Zone Pro Sync
Alternator Generac K0500124Y23

Physical specifications

Dimensions (L × W × H) 154.4 × 71 × 66.5 in (3922 × 1803 × 1689 mm)

Battery

Battery voltage (2) -12 VDC V

Disclaimer: Specifications should be verified against the official owner’s manual and confirmed on the Generac USA website.

Ernie Lo

Ernie Lo is a qualified web designer and web developer. He works as an IT support technician and website manager at Benleigh Vending, and he also fixes vending machines.

Recent Posts