Home » Appliances » Generac MG500 Specs (Power | Voltage | Weight)

Generac MG500 Specs (Power | Voltage | Weight)

The Generac MG500 compressor is listed with standby output of 500 kW, Natural Gas fuel, 60 Hz operation, 120/208 V, 120/240 V, 277/480 V, 347/600 V output, and Three phase.

Generac Generator Specifications

Generator • Natural Gas • 60 Hz • Three phase

Standby power: 500 kWVoltage: 120/208 V, 120/240 V, 277/480 V, 347/600 VDry weight: 9,273 lb (4,206 kg)

Key specifications

500 kWStandby power
Natural GasFuel
120/208 V, 120/240 V, 277/480 V, 347/600 VVoltage
Three phasePhase
9,273 lb (4,206 kg)Dry weight
60 HzFrequency

Visual model specs

Built only from this model’s supplied generator specifications.

Power output
Low 450 kW High 500 kW
Standby

500 kW

Prime

450 kW

Fluid capacities
Low 23.78 gal High 25.1 gal
Oil

23.78 gal

Coolant

25.1 gal

Model spec snapshot
Representative numeric specifications from this generator.
500 kWStandby
9,272.64 lbWeight

How the Generac MG500 compares

This compares the supplied numeric specification with Generac generators in the same broad standby-power class where enough comparable data exists.

Standby power
500 kW
16% below avg
37th percentile
Dry weight
9,273 lb
29% below avg
34th percentile
Oil capacity
23.78 gal
29% above avg
67th percentile
Standby power500 kW
Low 400 kWAverage 595.9 kWHigh 900 kW

About 16% below the similar-output Generac average. Around the 37th percentile for this field.

Dry weight9,273 lb
Low 6,361 lbAverage 13,113 lbHigh 22,496 lb

About 29% below the similar-output Generac average. Around the 34th percentile for this field.

Oil capacity23.78 gal
Low 7.13 galAverage 18.49 galHigh 47.55 gal

About 29% above the similar-output Generac average. Around the 67th percentile for this field.

This model Peer average

Generator information

Manufacturer Generac
Model MG500
Generator type Generator
Fuel Natural Gas
Frequency 60 Hz

Electrical output

Standby power 500 kW
Prime power 450 kW
Standby kVA 625.0
Voltage options 120/208 V, 120/240 V, 277/480 V, 347/600 V
Phase Three phase
Power factor 0.8

Engine, cooling and controls

Oil capacity 23.8 gal (90 L)
Coolant capacity 25.1 gal (95 L)
Maximum ambient 104 °F (40 °C)
Controller Power Zone Pro Sync
Alternator Generac K0500124Y23
Emissions EPA Certified Stationary Emergency

Physical specifications

Dry weight 9, 273 lb (4, 206 kg)
Dimensions (L × W × H) 154.4 × 71 × 67 in (3923 × 1803 × 1702 mm)

Battery

Battery voltage 24 V
Battery quantity 2

Disclaimer: Specifications should be verified against the official owner’s manual and confirmed on the Generac USA website.

Ernie Lo

Ernie Lo is a qualified web designer and web developer. He works as an IT support technician and website manager at Benleigh Vending, and he also fixes vending machines.

Recent Posts