Home » Appliances » Generac MMG330DI4 Specs (Power | Voltage | Weight)

Generac MMG330DI4 Specs (Power | Voltage | Weight)

The Generac MMG330DI4 compressor is listed with standby output of 290 kW, 60 Hz operation, 208 V, 480 V output, Three phase, and rated current of 1008 A.

Generac Generator Specifications

Generator • 60 Hz • Three phase

Standby power: 290 kWVoltage: 208 V, 480 VRated current: 1008 A

Key specifications

290 kWStandby power
208 V, 480 VVoltage
Three phasePhase
1008 ARated current
60 HzFrequency

Visual model specs

Built only from this model’s supplied generator specifications.

Power output
Low 263 kW High 290 kW
Standby

290 kW

Prime

263 kW

Model spec snapshot
Representative numeric specifications from this generator.
290 kWStandby
1,008 ACurrent

How the Generac MMG330DI4 compares

This compares the supplied numeric specification with Generac generators in the same broad standby-power class where enough comparable data exists.

Standby power
290 kW
13% above avg
60th percentile
Rated current
1,008 A
43% above avg
75th percentile
Standby power290 kW
Low 150 kWAverage 255.7 kWHigh 375 kW

About 13% above the similar-output Generac average. Around the 60th percentile for this field.

Rated current1,008 A
Low 311 AAverage 706 AHigh 1,183 A

About 43% above the similar-output Generac average. Around the 75th percentile for this field.

This model Peer average

Generator information

Manufacturer Generac
Model MMG330DI4
Generator type Generator
Frequency 60 Hz

Electrical output

Standby power 290 kW
Prime power 263 kW
Standby kVA 363.0
Voltage options 208 V, 480 V
Phase Three phase
Rated current 1008 A
Power factor 0.8
Circuit breaker 1200 A

Engine, cooling and controls

Alternator Marathon 432PSL6210

Physical specifications

Dimensions (L × W × H) 171.3 × 59.8 × 90.2 in (4350 × 1520 × 2290 mm)

Battery

Battery group Group 31
Battery cranking 1000 CCA
Battery voltage 12 V
Battery quantity 2

Fuel system and runtime

Fuel tank 459.1 gal (1, 738 L)
Tank runtime 23 hr

Disclaimer: Specifications should be verified against the official owner’s manual and confirmed on the Generac USA website.

Ernie Lo

Ernie Lo is a qualified web designer and web developer. He works as an IT support technician and website manager at Benleigh Vending, and he also fixes vending machines.

Recent Posts