Home » Appliances » Generac MMG480DI4 Specs (Power | Voltage | Weight)

Generac MMG480DI4 Specs (Power | Voltage | Weight)

The Generac MMG480DI4 compressor is listed with standby output of 419 kW, 60 Hz operation, 208 V, 480 V output, Three phase, and rated current of 1454 A.

Generac Generator Specifications

Generator • 60 Hz • Three phase

Standby power: 419 kWVoltage: 208 V, 480 VRated current: 1454 A

Key specifications

419 kWStandby power
208 V, 480 VVoltage
Three phasePhase
1454 ARated current
60 HzFrequency

Visual model specs

Built only from this model’s supplied generator specifications.

Power output
Low 379 kW High 419 kW
Standby

419 kW

Prime

379 kW

Model spec snapshot
Representative numeric specifications from this generator.
419 kWStandby
1,454 ACurrent

How the Generac MMG480DI4 compares

This compares the supplied numeric specification with Generac generators in the same broad standby-power class where enough comparable data exists.

Standby power
419 kW
30% below avg
18th percentile
Rated current
1,454 A
7% above avg
62nd percentile
Standby power419 kW
Low 400 kWAverage 595.9 kWHigh 900 kW

About 30% below the similar-output Generac average. Around the 18th percentile for this field.

Rated current1,454 A
Low 601 AAverage 1,360 AHigh 2,738 A

About 7% above the similar-output Generac average. Around the 62nd percentile for this field.

This model Peer average

Generator information

Manufacturer Generac
Model MMG480DI4
Generator type Generator
Frequency 60 Hz

Electrical output

Standby power 419 kW
Prime power 379 kW
Standby kVA 524.0
Voltage options 208 V, 480 V
Phase Three phase
Rated current 1454 A
Power factor 0.8
Circuit breaker 1600 A

Engine, cooling and controls

Alternator Marathon 433PSL6220

Physical specifications

Dimensions (L × W × H) 229.9 × 102 × 109.8 in (5840 × 2590 × 2790 mm)

Battery

Battery group Group 31
Battery cranking 1000 CCA
Battery voltage 24 V
Battery quantity 2

Fuel system and runtime

Fuel tank 616 gal (2, 332 L)
Tank runtime 20 hr

Disclaimer: Specifications should be verified against the official owner’s manual and confirmed on the Generac USA website.

Ernie Lo

Ernie Lo is a qualified web designer and web developer. He works as an IT support technician and website manager at Benleigh Vending, and he also fixes vending machines.

Recent Posts