The Generac MPSG1000 compressor is listed with standby output of 1000 kW, Natural Gas fuel, 60 Hz operation, 120/208 V, 277/480 V output, and rated current of 3470 A.
Generac Generator Specifications
Generator • Natural Gas • 60 Hz
Standby power: 1000 kWVoltage: 120/208 V, 277/480 VRated current: 3470 A
Key specifications
1000 kWStandby power
Natural GasFuel
120/208 V, 277/480 VVoltage
3470 ARated current
60 HzFrequency
Visual model specs
Built only from this model’s supplied generator specifications.
Model spec snapshot
Representative numeric specifications from this generator.
1,000 kWStandby
3,470 ACurrent
How the Generac MPSG1000 compares
This compares the supplied numeric specification with Generac generators in the same broad standby-power class where enough comparable data exists.
Standby power
1,000 kW
32% below avg
19th percentile
Rated current
3,470 A
101% above avg
93rd percentile
Standby power1,000 kW
Low 1,000 kWAverage 1,480.8 kWHigh 2,760 kW
About 32% below the similar-output Generac average. Around the 19th percentile for this field.
Rated current3,470 A
Low 202 AAverage 1,723 AHigh 3,324 A
About 101% above the similar-output Generac average. Around the 93rd percentile for this field.
This model Peer average
Generator information
| Manufacturer | Generac |
|---|---|
| Model | MPSG1000 |
| Generator type | Generator |
| Fuel | Natural Gas |
| Frequency | 60 Hz |
Electrical output
| Standby power | 1000 kW |
|---|---|
| Standby kVA | 1250.0 |
| Voltage options | 120/208 V, 277/480 V |
| Rated current | 3470 A |
| Power factor | 1 |
Engine, cooling and controls
| Coolant capacity | 38.5 gal (145.8 L) |
|---|---|
| Maximum ambient | 120 °F (49 °C) |
| Controller | PowerManager (PM-PC), PowerManager System (PM-SC) |
| Alternator | Generac 520 mm PMG Generac Alternators |
Disclaimer: Specifications should be verified against the official owner’s manual and confirmed on the Generac USA website.