The Generac MPSG350 compressor is listed with standby output of 350 kW, Natural Gas fuel, 60 Hz operation, 120/208 V, 277/480 V, 600 V output, and rated current of 1214 A.
Generac Generator Specifications
Generator • Natural Gas • 60 Hz
Standby power: 350 kWVoltage: 120/208 V, 277/480 V, 600 VRated current: 1214 A
Key specifications
350 kWStandby power
Natural GasFuel
120/208 V, 277/480 V, 600 VVoltage
1214 ARated current
60 HzFrequency
Visual model specs
Built only from this model’s supplied generator specifications.
Model spec snapshot
Representative numeric specifications from this generator.
350 kWStandby
1,214 ACurrent
How the Generac MPSG350 compares
This compares the supplied numeric specification with Generac generators in the same broad standby-power class where enough comparable data exists.
Standby power
350 kW
37% above avg
81st percentile
Rated current
1,214 A
72% above avg
95th percentile
Standby power350 kW
Low 150 kWAverage 255.7 kWHigh 375 kW
About 37% above the similar-output Generac average. Around the 81st percentile for this field.
Rated current1,214 A
Low 311 AAverage 706 AHigh 1,183 A
About 72% above the similar-output Generac average. Around the 95th percentile for this field.
This model Peer average
Generator information
| Manufacturer | Generac |
|---|---|
| Model | MPSG350 |
| Generator type | Generator |
| Fuel | Natural Gas |
| Frequency | 60 Hz |
Electrical output
| Standby power | 350 kW |
|---|---|
| Standby kVA | 437.0 |
| Voltage options | 120/208 V, 277/480 V, 600 V |
| Rated current | 1214 A |
Engine, cooling and controls
| Coolant capacity | 15.4 gal (58.3 L) |
|---|---|
| Maximum ambient | 120 °F (49 °C) |
| Controller | PowerManager System (PM-SC) & PowerManager (PM-PC) |
| Alternator | Generac 520 mm PMG |
Disclaimer: Specifications should be verified against the official owner’s manual and confirmed on the Generac USA website.