The Generac MPSG600 compressor is listed with standby output of 600 kW, Natural Gas fuel, 60 Hz operation, 120/208 V, 277/480 V output, and rated current of 902 A.
Generac Generator Specifications
Generator • Natural Gas • 60 Hz
Standby power: 600 kWVoltage: 120/208 V, 277/480 VRated current: 902 A
Key specifications
600 kWStandby power
Natural GasFuel
120/208 V, 277/480 VVoltage
902 ARated current
60 HzFrequency
Visual model specs
Built only from this model’s supplied generator specifications.
Model spec snapshot
Representative numeric specifications from this generator.
600 kWStandby
902 ACurrent
How the Generac MPSG600 compares
This compares the supplied numeric specification with Generac generators in the same broad standby-power class where enough comparable data exists.
Standby power
600 kW
In line with avg
57th percentile
Rated current
902 A
34% below avg
29th percentile
Standby power600 kW
Low 400 kWAverage 595.9 kWHigh 900 kW
Very close to the similar-output Generac average. Around the 57th percentile for this field.
Rated current902 A
Low 601 AAverage 1,360 AHigh 2,738 A
About 34% below the similar-output Generac average. Around the 29th percentile for this field.
This model Peer average
Generator information
| Manufacturer | Generac |
|---|---|
| Model | MPSG600 |
| Generator type | Generator |
| Fuel | Natural Gas |
| Frequency | 60 Hz |
Electrical output
| Standby power | 600 kW |
|---|---|
| Standby kVA | 750.0 |
| Voltage options | 120/208 V, 277/480 V |
| Rated current | 902 A |
Engine, cooling and controls
| Coolant capacity | 7.7 gal (29.1 L) |
|---|---|
| Maximum ambient | 120 °F (49 °C) |
| Controller | PowerManager System (PM-SC) & PowerManager (PM-PC) |
| Alternator | Generac 520 mm PMG |
Disclaimer: Specifications should be verified against the official owner’s manual and confirmed on the Generac USA website.