The Generac MQT100 compressor is listed with standby output of 100 kW, Natural Gas fuel, 60 Hz operation, 120/208 V, 277/480 V output, and Three phase.
Generator • Natural Gas • 60 Hz • Three phase
Key specifications
Visual model specs
Built only from this model’s supplied generator specifications.
1.25 gal
4.5 gal
How the Generac MQT100 compares
This compares the supplied numeric specification with Generac generators in the same broad standby-power class where enough comparable data exists.
About 9% above the similar-output Generac average. Around the 63rd percentile for this field.
About 60% below the similar-output Generac average. Around the 12th percentile for this field.
Generator information
| Manufacturer | Generac |
|---|---|
| Model | MQT100 |
| Generator type | Generator |
| Fuel | Natural Gas |
| Frequency | 60 Hz |
Electrical output
| Standby power | 100 kW |
|---|---|
| Voltage options | 120/208 V, 277/480 V |
| Phase | Three phase |
| Power factor | 0.8 |
| Circuit breaker | 300 A |
Engine, cooling and controls
| Oil capacity | 1.25 gal (4.7 L) |
|---|---|
| Coolant capacity | 4.5 gal (17 L) |
| Maximum ambient | 122 °F (50 °C) |
| Controller | PowerManager Digital Platform (PM-DCP) |
| Emissions | 2009 EPA |
Physical specifications
| Dimensions (L × W × H) | 115.2 × 54.8 × 54.8 in (2925 × 1392 × 1392 mm) |
|---|
Battery
| Battery group | 24F |
|---|---|
| Battery cranking | 625 CCA |
| Battery voltage | 12 V |
Disclaimer: Specifications should be verified against the official owner’s manual and confirmed on the Generac USA website.
