The Generac NP52G compressor is listed with standby output of 5 kW, gasoline fuel, 60 Hz operation, 120/240 V, 120 V output, Single phase, and rated current of 43.3 A.
Generac Generator Specifications
Generator • gasoline • 60 Hz • Single phase
Standby power: 5 kWVoltage: 120/240 V, 120 VRated current: 43.3 A
Key specifications
5 kWStandby power
gasolineFuel
120/240 V, 120 VVoltage
Single phasePhase
43.3 ARated current
60 HzFrequency
Visual model specs
Built only from this model’s supplied generator specifications.
Power output
Low 5 kW High 5 kW
Standby
5 kW
Prime
5 kW
Model spec snapshot
Representative numeric specifications from this generator.
5 kWStandby
43.3 ACurrent
How the Generac NP52G compares
This compares the supplied numeric specification with Generac generators in the same broad standby-power class where enough comparable data exists.
Standby power
5 kW
39% below avg
16th percentile
Rated current
43 A
8% below avg
38th percentile
Standby power5 kW
Low 3 kWAverage 8.2 kWHigh 14 kW
About 39% below the similar-output Generac average. Around the 16th percentile for this field.
Rated current43 A
Low 28 AAverage 47 AHigh 60 A
About 8% below the similar-output Generac average. Around the 38th percentile for this field.
This model Peer average
Generator information
| Manufacturer | Generac |
|---|---|
| Model | NP52G |
| Generator type | Generator |
| Fuel | gasoline |
| Frequency | 60 Hz |
Electrical output
| Standby power | 5 kW |
|---|---|
| Prime power | 5 kW |
| Voltage options | 120/240 V, 120 V |
| Phase | Single phase |
| Rated current | 43.3 A |
| Power factor | 1.0 |
Disclaimer: Specifications should be verified against the official owner’s manual and confirmed on the Generac USA website.