The Generac NP65G compressor is listed with standby output of 6 kW, 60 Hz operation, 120/240 V, 120 V output, Single phase, and rated current of 54.2 A.
Generac Generator Specifications
Generator • 60 Hz • Single phase
Standby power: 6 kWVoltage: 120/240 V, 120 VRated current: 54.2 A
Key specifications
6 kWStandby power
120/240 V, 120 VVoltage
Single phasePhase
54.2 ARated current
60 HzFrequency
Visual model specs
Built only from this model’s supplied generator specifications.
Power output
Low 6 kW High 6 kW
Standby
6 kW
Prime
6 kW
Model spec snapshot
Representative numeric specifications from this generator.
6 kWStandby
54.2 ACurrent
How the Generac NP65G compares
This compares the supplied numeric specification with Generac generators in the same broad standby-power class where enough comparable data exists.
Standby power
6 kW
27% below avg
29th percentile
Rated current
54 A
15% above avg
66th percentile
Standby power6 kW
Low 3 kWAverage 8.2 kWHigh 14 kW
About 27% below the similar-output Generac average. Around the 29th percentile for this field.
Rated current54 A
Low 28 AAverage 47 AHigh 60 A
About 15% above the similar-output Generac average. Around the 66th percentile for this field.
This model Peer average
Generator information
| Manufacturer | Generac |
|---|---|
| Model | NP65G |
| Generator type | Generator |
| Frequency | 60 Hz |
Electrical output
| Standby power | 6 kW |
|---|---|
| Prime power | 6 kW |
| Voltage options | 120/240 V, 120 V |
| Phase | Single phase |
| Rated current | 54.2 A |
| Power factor | 1.0 |
Disclaimer: Specifications should be verified against the official owner’s manual and confirmed on the Generac USA website.