The Generac NP66G compressor is listed with standby output of 6 kW, gasoline fuel, 60 Hz operation, 120/240 V, 120 V output, Single phase, and rated current of 55 A.
Generac Generator Specifications
Generator • gasoline • 60 Hz • Single phase
Standby power: 6 kWVoltage: 120/240 V, 120 VRated current: 55 A
Key specifications
6 kWStandby power
gasolineFuel
120/240 V, 120 VVoltage
Single phasePhase
55 ARated current
60 HzFrequency
Visual model specs
Built only from this model’s supplied generator specifications.
Power output
Low 6 kW High 6 kW
Standby
6 kW
Prime
6 kW
Model spec snapshot
Representative numeric specifications from this generator.
6 kWStandby
55 ACurrent
How the Generac NP66G compares
This compares the supplied numeric specification with Generac generators in the same broad standby-power class where enough comparable data exists.
Standby power
6 kW
27% below avg
29th percentile
Rated current
55 A
17% above avg
74th percentile
Standby power6 kW
Low 3 kWAverage 8.2 kWHigh 14 kW
About 27% below the similar-output Generac average. Around the 29th percentile for this field.
Rated current55 A
Low 28 AAverage 47 AHigh 60 A
About 17% above the similar-output Generac average. Around the 74th percentile for this field.
This model Peer average
Generator information
| Manufacturer | Generac |
|---|---|
| Model | NP66G |
| Generator type | Generator |
| Fuel | gasoline |
| Frequency | 60 Hz |
Electrical output
| Standby power | 6 kW |
|---|---|
| Prime power | 6 kW |
| Voltage options | 120/240 V, 120 V |
| Phase | Single phase |
| Rated current | 55 A |
| Power factor | 1.0 |
Disclaimer: Specifications should be verified against the official owner’s manual and confirmed on the Generac USA website.