The Generac QT150 compressor is listed with standby output of 150 kW, Natural Gas fuel, 60 Hz operation, 120/240 V, 120/208 V, 277/480 V output, and sound level of 79 dBA @ 23 ft (7 m).
Generator • Natural Gas • 60 Hz
Key specifications
Visual model specs
Built only from this model’s supplied generator specifications.
1.25 gal
4.5 gal
How the Generac QT150 compares
This compares the supplied numeric specification with Generac generators in the same broad standby-power class where enough comparable data exists.
About 41% below the similar-output Generac average. Around the 8th percentile for this field.
About 42% below the similar-output Generac average. Around the 8th percentile for this field.
Very close to the similar-output Generac average. Around the 41st percentile for this field.
About 83% below the similar-output Generac average. Around the 3rd percentile for this field.
Generator information
| Manufacturer | Generac |
|---|---|
| Model | QT150 |
| Generator type | Generator |
| Fuel | Natural Gas |
| Frequency | 60 Hz |
Electrical output
| Standby power | 150 kW |
|---|---|
| Voltage options | 120/240 V, 120/208 V, 277/480 V |
| Power factor | 0.8 |
Engine, cooling and controls
| Oil capacity | 1.25 gal (4.7 L) |
|---|---|
| Coolant capacity | 4.5 gal (17 L) |
| Maximum ambient | 122 °F (50 °C) |
| Controller | H-100, H-100 microprocessor, Nexus, Nexus Digital, PowerManager H-100 |
| Emissions | Meets 2010 EPA Emission Regulations |
Physical specifications
| Dry weight | 3, 977 lb (1, 804 kg) |
|---|---|
| Sound level | 79 dBA @ 23 ft (7 m) |
Battery
| Battery group | 24F |
|---|---|
| Battery cranking | 525 CCA |
| Battery voltage | 12 V |
Disclaimer: Specifications should be verified against the official owner’s manual and confirmed on the Generac USA website.