The Generac SD050 compressor is listed with standby output of 50 kW, Diesel fuel, 60 Hz operation, 120/240 V, 120/208 V, 277/480 V, 600 V output, and Single or Three.
Generator • Diesel • 60 Hz • Single or Three
Key specifications
Visual model specs
Built only from this model’s supplied generator specifications.
50 kW
40 kW
1.85 gal
3.86 gal
How the Generac SD050 compares
This compares the supplied numeric specification with Generac generators in the same broad standby-power class where enough comparable data exists.
About 20% above the similar-output Generac average. Around the 88th percentile for this field.
About 5% below the similar-output Generac average. Around the 56th percentile for this field.
Very close to the similar-output Generac average. Around the 71st percentile for this field.
Generator information
| Manufacturer | Generac |
|---|---|
| Model | SD050 |
| Generator type | Generator |
| Fuel | Diesel |
| Frequency | 60 Hz |
Electrical output
| Standby power | 50 kW |
|---|---|
| Prime power | 40 kW |
| Standby kVA | 63.0 |
| Voltage options | 120/240 V, 120/208 V, 277/480 V, 600 V |
| Phase | Single or Three |
| Power factor | 0.8 |
Engine, cooling and controls
| Oil capacity | 1.85 gal (7 L) |
|---|---|
| Coolant capacity | 3.86 gal (14.6 L) |
| Maximum ambient | 110 °F (43 °C) |
| Controller | Digital H Control Panel |
| Alternator | 390mm |
| Emissions | EPA Certified Stationary Emergency |
Physical specifications
| Dry weight | 1, 755 lb (796 kg) |
|---|---|
| Dimensions (L × W × H) | 76.7 × 37.4 × 45.2 in (1948 × 950 × 1147 mm) |
Battery
| Battery group | 27F |
|---|---|
| Battery cranking | 700 CCA |
| Battery voltage | 12 V |
| Battery quantity | 2 |
Disclaimer: Specifications should be verified against the official owner’s manual and confirmed on the Generac USA website.