Home » Appliances » Generac SD100 Specs (Power | Voltage | Weight)

Generac SD100 Specs (Power | Voltage | Weight)

The Generac SD100 compressor is listed with standby output of 100 kW, Diesel fuel, 60 Hz operation, and 120/240 V, 120/208 V, 277/480 V, 346/600 V output.

Generac Generator Specifications

Generator • Diesel • 60 Hz

Standby power: 100 kWVoltage: 120/240 V, 120/208 V, 277/480 V, 346/600 VDry weight: 3,104 lb (1,408 kg)

Key specifications

100 kWStandby power
DieselFuel
120/240 V, 120/208 V, 277/480 V, 346/600 VVoltage
3,104 lb (1,408 kg)Dry weight
60 HzFrequency

Visual model specs

Built only from this model’s supplied generator specifications.

Power output
Low 90 kW High 100 kW
Standby

100 kW

Prime

90 kW

Fluid capacities
Low 4.49 gal High 5.65 gal
Oil

4.49 gal

Coolant

5.65 gal

Model spec snapshot
Representative numeric specifications from this generator.
100 kWStandby
3,104.11 lbWeight

How the Generac SD100 compares

This compares the supplied numeric specification with Generac generators in the same broad standby-power class where enough comparable data exists.

Standby power
100 kW
9% above avg
63rd percentile
Dry weight
3,104 lb
23% below avg
50th percentile
Oil capacity
4.49 gal
45% above avg
81st percentile
Standby power100 kW
Low 60 kWAverage 91.9 kWHigh 136.5 kW

About 9% above the similar-output Generac average. Around the 63rd percentile for this field.

Dry weight3,104 lb
Low 1,789 lbAverage 4,037 lbHigh 9,667 lb

About 23% below the similar-output Generac average. Around the 50th percentile for this field.

Oil capacity4.49 gal
Low 1.18 galAverage 3.11 galHigh 7.54 gal

About 45% above the similar-output Generac average. Around the 81st percentile for this field.

This model Peer average

Generator information

Manufacturer Generac
Model SD100
Generator type Generator
Fuel Diesel
Frequency 60 Hz

Electrical output

Standby power 100 kW
Prime power 90 kW
Standby kVA 125.0
Voltage options 120/240 V, 120/208 V, 277/480 V, 346/600 V
Power factor 0.8

Engine, cooling and controls

Oil capacity 4.49 gal (17 L)
Coolant capacity 5.65 gal (21.4 L)
Maximum ambient 110 °F (43 °C)
Controller POWERZONE 410
Alternator 390 (4-pole, Class H insulation)
Emissions Stationary Emergency

Physical specifications

Dry weight 3, 104 lb (1, 408 kg)
Dimensions (L × W × H) 110 × 40 × 65 in (2794 × 1016 × 1651 mm)

Battery

Battery group 27F
Battery cranking 995 CCA
Battery voltage 12 VDC V
Battery quantity 1

Disclaimer: Specifications should be verified against the official owner’s manual and confirmed on the Generac USA website.

Ernie Lo

Ernie Lo is a qualified web designer and web developer. He works as an IT support technician and website manager at Benleigh Vending, and he also fixes vending machines.

Recent Posts