Home » Appliances » Generac SD130 Specs (Power | Voltage | Weight)

Generac SD130 Specs (Power | Voltage | Weight)

The Generac SD130 compressor is listed with standby output of 130 kW, Diesel fuel, 60 Hz operation, 120/240 V, 120/208 V, 277/480 V, 346/600 V output, and Three phase.

Generac Generator Specifications

Generator • Diesel • 60 Hz • Three phase

Standby power: 130 kWVoltage: 120/240 V, 120/208 V, 277/480 V, 346/600 VDry weight: 3,104 lb (1,408 kg)

Key specifications

130 kWStandby power
DieselFuel
120/240 V, 120/208 V, 277/480 V, 346/600 VVoltage
Three phasePhase
3,104 lb (1,408 kg)Dry weight
60 HzFrequency

Visual model specs

Built only from this model’s supplied generator specifications.

Power output
Low 117 kW High 130 kW
Standby

130 kW

Prime

117 kW

Fluid capacities
Low 4.49 gal High 11.2 gal
Oil

4.49 gal

Coolant

11.2 gal

Model spec snapshot
Representative numeric specifications from this generator.
130 kWStandby
3,104.11 lbWeight

How the Generac SD130 compares

This compares the supplied numeric specification with Generac generators in the same broad standby-power class where enough comparable data exists.

Standby power
130 kW
42% above avg
84th percentile
Dry weight
3,104 lb
23% below avg
50th percentile
Oil capacity
4.49 gal
45% above avg
81st percentile
Standby power130 kW
Low 60 kWAverage 91.9 kWHigh 136.5 kW

About 42% above the similar-output Generac average. Around the 84th percentile for this field.

Dry weight3,104 lb
Low 1,789 lbAverage 4,037 lbHigh 9,667 lb

About 23% below the similar-output Generac average. Around the 50th percentile for this field.

Oil capacity4.49 gal
Low 1.18 galAverage 3.11 galHigh 7.54 gal

About 45% above the similar-output Generac average. Around the 81st percentile for this field.

This model Peer average

Generator information

Manufacturer Generac
Model SD130
Generator type Generator
Fuel Diesel
Frequency 60 Hz

Electrical output

Standby power 130 kW
Prime power 117 kW
Standby kVA 130.0
Voltage options 120/240 V, 120/208 V, 277/480 V, 346/600 V
Phase Three phase
Power factor 0.8

Engine, cooling and controls

Oil capacity 4.49 gal (17 L)
Coolant capacity 11.2 gal (42.4 L)
Maximum ambient 122 °F (50 °C)
Controller Digital H Control Panel
Alternator 390 (4-pole, Class H insulation)
Emissions EPA Certified Stationary Emergency

Physical specifications

Dry weight 3, 104 lb (1, 408 kg)
Dimensions (L × W × H) 110 × 40 × 65 in (2794 × 1016 × 1651 mm)

Battery

Battery group 4D
Battery cranking 995 CCA
Battery voltage 12 V
Battery quantity 2

Disclaimer: Specifications should be verified against the official owner’s manual and confirmed on the Generac USA website.

Ernie Lo

Ernie Lo is a qualified web designer and web developer. He works as an IT support technician and website manager at Benleigh Vending, and he also fixes vending machines.

Recent Posts