The Generac SD200 compressor is listed with standby output of 200 kW, Diesel fuel, 60 Hz operation, 120/240 V, 120/208 V, 277/480 V, 346/600 V output, and Three phase.
Generator • Diesel • 60 Hz • Three phase
Key specifications
Visual model specs
Built only from this model’s supplied generator specifications.
200 kW
180 kW
7.4 gal
13 gal
How the Generac SD200 compares
This compares the supplied numeric specification with Generac generators in the same broad standby-power class where enough comparable data exists.
About 22% below the similar-output Generac average. Around the 32nd percentile for this field.
About 35% below the similar-output Generac average. Around the 19th percentile for this field.
Very close to the similar-output Generac average. Around the 26th percentile for this field.
Generator information
| Manufacturer | Generac |
|---|---|
| Model | SD200 |
| Generator type | Generator |
| Fuel | Diesel |
| Frequency | 60 Hz |
Electrical output
| Standby power | 200 kW |
|---|---|
| Prime power | 180 kW |
| Standby kVA | 250.0 |
| Voltage options | 120/240 V, 120/208 V, 277/480 V, 346/600 V |
| Phase | Three phase |
| Power factor | 0.8 |
Engine, cooling and controls
| Oil capacity | 7.4 gal (28 L) |
|---|---|
| Coolant capacity | 13 gal (49.2 L) |
| Maximum ambient | 104 °F (40 °C) |
| Controller | H100 Digital |
| Alternator | Generac 520mm |
| Emissions | Stationary Emergency |
Physical specifications
| Dry weight | 4, 464 lb (2, 025 kg) |
|---|---|
| Dimensions (L × W × H) | 128 × 54 × 58 in (3251 × 1372 × 1473 mm) |
Battery
| Battery group | 4D |
|---|---|
| Battery cranking | 995 CCA |
| Battery voltage | 24VDC V |
| Battery quantity | 2 |
Fuel system and runtime
| Fuel tank | 5.55 gal (21 L) |
|---|
Disclaimer: Specifications should be verified against the official owner’s manual and confirmed on the Generac USA website.