The Generac SD2000 compressor is listed with standby output of 2000 kW, Diesel fuel, 60 Hz operation, 277/480 V, 600 V output, and Three phase.
Generator • Diesel • 60 Hz • Three phase
Key specifications
Visual model specs
Built only from this model’s supplied generator specifications.
2,000 kW
1,600 kW
66.04 gal
129.97 gal
How the Generac SD2000 compares
This compares the supplied numeric specification with Generac generators in the same broad standby-power class where enough comparable data exists.
About 35% above the similar-output Generac average. Around the 85th percentile for this field.
About 29% above the similar-output Generac average. Around the 78th percentile for this field.
About 39% above the similar-output Generac average. Around the 92nd percentile for this field.
Generator information
| Manufacturer | Generac |
|---|---|
| Model | SD2000 |
| Generator type | Generator |
| Fuel | Diesel |
| Frequency | 60 Hz |
Electrical output
| Standby power | 2000 kW |
|---|---|
| Prime power | 1600 kW |
| Standby kVA | 2000.0 |
| Voltage options | 277/480 V, 600 V |
| Phase | Three phase |
| Power factor | 0.8 |
Engine, cooling and controls
| Oil capacity | 66 gal (250 L) |
|---|---|
| Coolant capacity | 130 gal (492 L) |
| Maximum ambient | 122 °F (50 °C) |
| Controller | E Control Panel |
Physical specifications
| Dry weight | 30, 325 lb (13, 755 kg) |
|---|
Battery
| Battery voltage | 24V V |
|---|---|
| Battery quantity | 4 |
Disclaimer: Specifications should be verified against the official owner’s manual and confirmed on the Generac USA website.