Home » Appliances » Generac SD275 Specs (Power | Voltage | Weight)

Generac SD275 Specs (Power | Voltage | Weight)

The Generac SD275 compressor is listed with standby output of 275 kW, Diesel fuel, 60 Hz operation, 120/208 V, 120/240 V, 277/480 V, 600 V output, and Three phase.

Generac Generator Specifications

Generator • Diesel • 60 Hz • Three phase

Standby power: 275 kWVoltage: 120/208 V, 120/240 V, 277/480 V, 600 VDry weight: 5,600 lb (2,540 kg)

Key specifications

275 kWStandby power
DieselFuel
120/208 V, 120/240 V, 277/480 V, 600 VVoltage
Three phasePhase
5,600 lb (2,540 kg)Dry weight
60 HzFrequency

Visual model specs

Built only from this model’s supplied generator specifications.

Power output
Low 233 kW High 275 kW
Standby

275 kW

Prime

233 kW

Fluid capacities
Low 7.93 gal High 10.57 gal
Oil

7.93 gal

Coolant

10.57 gal

Model spec snapshot
Representative numeric specifications from this generator.
275 kWStandby
5,599.74 lbWeight

How the Generac SD275 compares

This compares the supplied numeric specification with Generac generators in the same broad standby-power class where enough comparable data exists.

Standby power
275 kW
8% above avg
52nd percentile
Dry weight
5,600 lb
18% below avg
28th percentile
Oil capacity
7.93 gal
5% above avg
36th percentile
Standby power275 kW
Low 150 kWAverage 255.7 kWHigh 375 kW

About 8% above the similar-output Generac average. Around the 52nd percentile for this field.

Dry weight5,600 lb
Low 2,844 lbAverage 6,845 lbHigh 12,362 lb

About 18% below the similar-output Generac average. Around the 28th percentile for this field.

Oil capacity7.93 gal
Low 1.25 galAverage 7.51 galHigh 9.51 gal

About 5% above the similar-output Generac average. Around the 36th percentile for this field.

This model Peer average

Generator information

Manufacturer Generac
Model SD275
Generator type Generator
Fuel Diesel
Frequency 60 Hz

Electrical output

Standby power 275 kW
Prime power 233 kW
Standby kVA 275.0
Voltage options 120/208 V, 120/240 V, 277/480 V, 600 V
Phase Three phase
Power factor 0.8

Engine, cooling and controls

Oil capacity 7.93 gal (30 L)
Coolant capacity 10.6 gal (40 L)
Maximum ambient 122 °F (50 °C)
Controller H100 Digital
Alternator K0275124Y21 (4-pole, Class H insulation)
Emissions Stationary Emergency

Physical specifications

Dry weight 5, 600 lb (2, 540 kg)
Dimensions (L × W × H) 137.5 × 57.6 × 67.8 in (3493 × 1463 × 1722 mm)

Battery

Battery group 31
Battery cranking 1155 CCA
Battery voltage 12V V
Battery quantity 2

Disclaimer: Specifications should be verified against the official owner’s manual and confirmed on the Generac USA website.

Ernie Lo

Ernie Lo is a qualified web designer and web developer. He works as an IT support technician and website manager at Benleigh Vending, and he also fixes vending machines.

Recent Posts