The Generac SD450 compressor is listed with standby output of 450 kW, Diesel fuel, 60 Hz operation, 120/208 V, 120/240 V, 277/480 V, 600 V output, and Three phase.
Generator • Diesel • 60 Hz • Three phase
Key specifications
Visual model specs
Built only from this model’s supplied generator specifications.
450 kW
360 kW
14.24 gal
32.89 gal
How the Generac SD450 compares
This compares the supplied numeric specification with Generac generators in the same broad standby-power class where enough comparable data exists.
About 24% below the similar-output Generac average. Around the 23rd percentile for this field.
About 35% below the similar-output Generac average. Around the 29th percentile for this field.
About 23% below the similar-output Generac average. Around the 56th percentile for this field.
Generator information
| Manufacturer | Generac |
|---|---|
| Model | SD450 |
| Generator type | Generator |
| Fuel | Diesel |
| Frequency | 60 Hz |
Electrical output
| Standby power | 450 kW |
|---|---|
| Prime power | 360 kW |
| Standby kVA | 450.0 |
| Voltage options | 120/208 V, 120/240 V, 277/480 V, 600 V |
| Phase | Three phase |
| Power factor | 0.8 |
Engine, cooling and controls
| Oil capacity | 14.2 gal (53.9 L) |
|---|---|
| Coolant capacity | 32.9 gal (124.5 L) |
| Maximum ambient | 122 °F (50 °C) |
| Controller | E Control Panel |
Physical specifications
| Dry weight | 8, 523 lb (3, 866 kg) |
|---|
Battery
| Battery voltage | 24V V |
|---|---|
| Battery quantity | 2 |
Disclaimer: Specifications should be verified against the official owner’s manual and confirmed on the Generac USA website.