Home » Appliances » Generac SD900 Specs (Power | Voltage | Weight)

Generac SD900 Specs (Power | Voltage | Weight)

The Generac SD900 compressor is listed with standby output of 900 kW, Diesel #2 fuel, 60 Hz operation, 120/208 V, 120/240 V, 277/480 V, 347/600 V output, and Three phase.

Generac Generator Specifications

Generator • Diesel #2 • 60 Hz • Three phase

Standby power: 900 kWVoltage: 120/208 V, 120/240 V, 277/480 V, 347/600 VDry weight: 20,884 lb (9,473 kg)

Key specifications

900 kWStandby power
Diesel #2Fuel
120/208 V, 120/240 V, 277/480 V, 347/600 VVoltage
Three phasePhase
20,884 lb (9,473 kg)Dry weight
60 HzFrequency

Visual model specs

Built only from this model’s supplied generator specifications.

Power output
Low 810 kW High 900 kW
Standby

900 kW

Prime

810 kW

Fluid capacities
Low 47.55 gal High 75.98 gal
Oil

47.55 gal

Coolant

75.98 gal

Model spec snapshot
Representative numeric specifications from this generator.
900 kWStandby
20,884.39 lbWeight

How the Generac SD900 compares

This compares the supplied numeric specification with Generac generators in the same broad standby-power class where enough comparable data exists.

Standby power
900 kW
51% above avg
97th percentile
Dry weight
20,884 lb
59% above avg
84th percentile
Oil capacity
47.55 gal
157% above avg
96th percentile
Standby power900 kW
Low 400 kWAverage 595.9 kWHigh 900 kW

About 51% above the similar-output Generac average. Around the 97th percentile for this field.

Dry weight20,884 lb
Low 6,361 lbAverage 13,113 lbHigh 22,496 lb

About 59% above the similar-output Generac average. Around the 84th percentile for this field.

Oil capacity47.55 gal
Low 7.13 galAverage 18.49 galHigh 47.55 gal

About 157% above the similar-output Generac average. Around the 96th percentile for this field.

This model Peer average

Generator information

Manufacturer Generac
Model SD900
Generator type Generator
Fuel Diesel #2
Frequency 60 Hz

Electrical output

Standby power 900 kW
Prime power 810 kW
Standby kVA 1125.0
Voltage options 120/208 V, 120/240 V, 277/480 V, 347/600 V
Phase Three phase
Power factor 0.8

Engine, cooling and controls

Oil capacity 47.6 gal (180 L)
Coolant capacity 76 gal (287.6 L)
Maximum ambient 122 °F (50 °C)
Controller InterliGen NT Display
Alternator 1000kW, 125°C, NEMA H (4-pole, Class H insulation)
Emissions Tier 2

Physical specifications

Dry weight 20, 884 lb (9, 473 kg)
Dimensions (L × W × H) 174 × 89 × 98 in (4420 × 2261 × 2489 mm)

Battery

Battery group 8D
Battery voltage 12 VDC V
Battery quantity 2

Disclaimer: Specifications should be verified against the official owner’s manual and confirmed on the Generac USA website.

Ernie Lo

Ernie Lo is a qualified web designer and web developer. He works as an IT support technician and website manager at Benleigh Vending, and he also fixes vending machines.

Recent Posts