Home » Appliances » Generac SG010 Specs (Power | Voltage | Weight)

Generac SG010 Specs (Power | Voltage | Weight)

The Generac SG010 compressor is listed with standby output of 10 kW, Natural Gas or L.P. Vapor fuel, 60 Hz operation, 120/240 V, 120/208 V, 277/480 V output, and Single phase / Three phase.

Generac Generator Specifications

Generator • Natural Gas or L.P. Vapor • 60 Hz • Single phase / Three phase

Standby power: 10 kWVoltage: 120/240 V, 120/208 V, 277/480 VDry weight: 1,649 lb (748 kg)

Key specifications

10 kWStandby power
Natural Gas or L.P. VaporFuel
120/240 V, 120/208 V, 277/480 VVoltage
Single phase / Three phasePhase
1,649 lb (748 kg)Dry weight
60 HzFrequency

Visual model specs

Built only from this model’s supplied generator specifications.

Power output
Low 7 kW High 10 kW
Standby

10 kW

Prime

7 kW

Fluid capacities
Low 1 gal High 1.74 gal
Oil

1 gal

Coolant

1.74 gal

Model spec snapshot
Representative numeric specifications from this generator.
10 kWStandby
1,649.06 lbWeight

How the Generac SG010 compares

This compares the supplied numeric specification with Generac generators in the same broad standby-power class where enough comparable data exists.

Standby power
10 kW
22% above avg
71st percentile
Dry weight
1,649 lb
275% above avg
99th percentile
Oil capacity
1 gal
93% above avg
94th percentile
Standby power10 kW
Low 3 kWAverage 8.2 kWHigh 14 kW

About 22% above the similar-output Generac average. Around the 71st percentile for this field.

Dry weight1,649 lb
Low 84 lbAverage 440 lbHigh 1,433 lb

About 275% above the similar-output Generac average. Around the 99th percentile for this field.

Oil capacity1 gal
Low 0.25 galAverage 0.52 galHigh 1.7 gal

About 93% above the similar-output Generac average. Around the 94th percentile for this field.

This model Peer average

Generator information

Manufacturer Generac
Model SG010
Generator type Generator
Fuel Natural Gas or L.P. Vapor
Frequency 60 Hz

Electrical output

Standby power 10 kW
Prime power 7 kW
Standby kVA 10.0
Voltage options 120/240 V, 120/208 V, 277/480 V
Phase Single phase / Three phase
Power factor 1.0 / 0.8

Engine, cooling and controls

Oil capacity 1 gal (3.8 L)
Coolant capacity 1.74 gal (6.6 L)
Maximum ambient 77 °F (25 °C)
Controller H-100

Physical specifications

Dry weight 1, 649 lb (748 kg)
Dimensions (L × W × H) 66.8 × 29 × 36.1 in (1697 × 736 × 918 mm)

Battery

Battery group 26F
Battery cranking 530 CCA
Battery voltage 12 V V
Battery quantity 1

Disclaimer: Specifications should be verified against the official owner’s manual and confirmed on the Generac USA website.

Ernie Lo

Ernie Lo is a qualified web designer and web developer. He works as an IT support technician and website manager at Benleigh Vending, and he also fixes vending machines.

Recent Posts