Home » Appliances » Generac SG050 Specs (Power | Voltage | Weight)

Generac SG050 Specs (Power | Voltage | Weight)

The Generac SG050 compressor is listed with standby output of 50 kW, Natural Gas, Propane Vapor fuel, 60 Hz operation, 120/240 V, 120/208 V, 277/480 V, 346/600 V output, and Three phase.

Generac Generator Specifications

Generator • Natural Gas, Propane Vapor • 60 Hz • Three phase

Standby power: 50 kWVoltage: 120/240 V, 120/208 V, 277/480 V, 346/600 VDry weight: 1,929 lb (875 kg)

Key specifications

50 kWStandby power
Natural Gas, Propane VaporFuel
120/240 V, 120/208 V, 277/480 V, 346/600 VVoltage
Three phasePhase
1,929 lb (875 kg)Dry weight
60 HzFrequency

Visual model specs

Built only from this model’s supplied generator specifications.

Power output
Low 45 kW High 50 kW
Standby

50 kW

Prime

45 kW

Fluid capacities
Low 1.51 gal High 6.31 gal
Oil

1.51 gal

Coolant

6.31 gal

Model spec snapshot
Representative numeric specifications from this generator.
50 kWStandby
1,929.04 lbWeight

How the Generac SG050 compares

This compares the supplied numeric specification with Generac generators in the same broad standby-power class where enough comparable data exists.

Standby power
50 kW
20% above avg
88th percentile
Dry weight
1,929 lb
5% above avg
67th percentile
Oil capacity
1.51 gal
18% below avg
46th percentile
Standby power50 kW
Low 30 kWAverage 41.7 kWHigh 55 kW

About 20% above the similar-output Generac average. Around the 88th percentile for this field.

Dry weight1,929 lb
Low 821 lbAverage 1,841 lbHigh 3,333 lb

About 5% above the similar-output Generac average. Around the 67th percentile for this field.

Oil capacity1.51 gal
Low 1 galAverage 1.84 galHigh 4.29 gal

About 18% below the similar-output Generac average. Around the 46th percentile for this field.

This model Peer average

Generator information

Manufacturer Generac
Model SG050
Generator type Generator
Fuel Natural Gas, Propane Vapor
Frequency 60 Hz

Electrical output

Standby power 50 kW
Prime power 45 kW
Standby kVA 63.0
Voltage options 120/240 V, 120/208 V, 277/480 V, 346/600 V
Phase Three phase
Power factor 0.8

Engine, cooling and controls

Oil capacity 1.51 gal (5.7 L)
Coolant capacity 6.31 gal (23.9 L)
Maximum ambient 104 °F (40 °C)
Controller H-100, Power Zone Pro
Alternator Generac 390 mm (4-pole, Class H insulation)
Emissions EPA Certified Stationary Emergency

Physical specifications

Dry weight 1, 929 lb (875 kg)
Dimensions (L × W × H) 92.9 × 40 × 75.4 in (2360 × 1015 × 1914 mm)

Battery

Battery group 27F
Battery cranking 525/700/925CCA CCA
Battery voltage 12 VDC V
Battery quantity 1

Disclaimer: Specifications should be verified against the official owner’s manual and confirmed on the Generac USA website.

Ernie Lo

Ernie Lo is a qualified web designer and web developer. He works as an IT support technician and website manager at Benleigh Vending, and he also fixes vending machines.

Recent Posts