Home » Appliances » Generac SG060 Specs (Power | Voltage | Weight)

Generac SG060 Specs (Power | Voltage | Weight)

The Generac SG060 compressor is listed with standby output of 60 kW, Natural Gas or LP Vapor fuel, 60 Hz operation, and 120/240 V, 120/208 V, 277/480 V, 346/600 V output.

Generac Generator Specifications

Generator • Natural Gas or LP Vapor • 60 Hz

Standby power: 60 kWVoltage: 120/240 V, 120/208 V, 277/480 V, 346/600 VDry weight: 1,929 lb (875 kg)

Key specifications

60 kWStandby power
Natural Gas or LP VaporFuel
120/240 V, 120/208 V, 277/480 V, 346/600 VVoltage
1,929 lb (875 kg)Dry weight
60 HzFrequency

Visual model specs

Built only from this model’s supplied generator specifications.

Power output
Low 54 kW High 60 kW
Standby

60 kW

Prime

54 kW

Fluid capacities
Low 1.51 gal High 6.31 gal
Oil

1.51 gal

Coolant

6.31 gal

Model spec snapshot
Representative numeric specifications from this generator.
60 kWStandby
1,929.04 lbWeight

How the Generac SG060 compares

This compares the supplied numeric specification with Generac generators in the same broad standby-power class where enough comparable data exists.

Standby power
60 kW
35% below avg
10th percentile
Dry weight
1,929 lb
52% below avg
8th percentile
Oil capacity
1.51 gal
52% below avg
32nd percentile
Standby power60 kW
Low 60 kWAverage 91.9 kWHigh 136.5 kW

About 35% below the similar-output Generac average. Around the 10th percentile for this field.

Dry weight1,929 lb
Low 1,789 lbAverage 4,037 lbHigh 9,667 lb

About 52% below the similar-output Generac average. Around the 8th percentile for this field.

Oil capacity1.51 gal
Low 1.18 galAverage 3.11 galHigh 7.54 gal

About 52% below the similar-output Generac average. Around the 32nd percentile for this field.

This model Peer average

Generator information

Manufacturer Generac
Model SG060
Generator type Generator
Fuel Natural Gas or LP Vapor
Frequency 60 Hz

Electrical output

Standby power 60 kW
Prime power 54 kW
Standby kVA 75.0
Voltage options 120/240 V, 120/208 V, 277/480 V, 346/600 V

Engine, cooling and controls

Oil capacity 1.51 gal (5.7 L)
Coolant capacity 6.31 gal (23.9 L)
Maximum ambient 104 °F (40 °C)
Controller H-100
Alternator Generac 390 mm (4-pole, Class H insulation)
Emissions Meets EPA Emission Regulations

Physical specifications

Dry weight 1, 929 lb (875 kg)
Dimensions (L × W × H) 92.9 × 40 × 75.4 in (2360 × 1015 × 1914 mm)

Battery

Battery group 24F
Battery cranking 525 CCA
Battery voltage 12 VDC V
Battery quantity 1

Disclaimer: Specifications should be verified against the official owner’s manual and confirmed on the Generac USA website.

Ernie Lo

Ernie Lo is a qualified web designer and web developer. He works as an IT support technician and website manager at Benleigh Vending, and he also fixes vending machines.

Recent Posts