The Kohler 10RY generator is listed with standby output of 10 kW, LP Gas or Natural Gas fuel, 60 Hz operation, 3 available voltage configurations, and Single phase.
Generator • LP Gas or Natural Gas • 60 Hz • Single phase
Key specifications
Useful generator charts
Charts are shown only when this model has enough usable source data.
17.2 kW
24.8 kW
How the Kohler 10RY compares
This compares the supplied numeric specification with Kohler generators in the same broad standby-power class where enough comparable data exists.
About 29% above the similar-output Kohler average. Around the 75th percentile for this field.
About 64% above the similar-output Kohler average. Around the 88th percentile for this field.
About 9% below the similar-output Kohler average. Around the 49th percentile for this field.
Generator information
| Manufacturer | Kohler |
|---|---|
| Model | 10RY |
| Generator type | Generator |
| Fuel | LP Gas or Natural Gas |
| Frequency | 60 Hz |
Electrical output
| Standby power | 10 kW |
|---|---|
| Voltage options | 120/240 V, 127/220 V, 220/380 V |
| Phase | Single phase |
| Power factor | 1.0 |
Engine, cooling and controls
| Engine model | Ford VSG-411 |
|---|---|
| Oil capacity | 0.74 gal (2.8 L) |
| Coolant capacity | 0.92 gal (3.5 L) |
| Maximum ambient | 122 °F (50 °C) |
| Controller | relay |
| Alternator | Kohler 4H5 (RY) |
Physical specifications
| Dry weight | 580 lb (263 kg) |
|---|
Battery
| Battery cranking | 235 CCA |
|---|---|
| Battery voltage | 12 V |
| Battery quantity | 1 |
Maintenance and service parts
| Oil filter | Part number: 279218 |
|---|---|
| Fuel filter | Interval: 400 hr |
| Coolant | Interval: 400 hr; Specification: 50% ethylene glycol and 50% clean, softened water; Capacity: 11.8 L |
| Belt | Specification: 36-46 kg (new belt), 25-34 kg (used belt) |
Disclaimer: Specifications should be verified against the official owner’s or service manual and confirmed on the Kohler North America generator website.