Home » Appliances » Cummins Onan C350 D5 Specs (Power | Fuel Consumption)

Cummins Onan C350 D5 Specs (Power | Fuel Consumption)

The Cummins Onan C350 D5 generator is listed with standby output of 350 kW, 50 Hz operation, 15 available voltage configurations, and A (U) / B (V) / C (W).

Cummins Onan Generator Specifications

Generator • 50 Hz • A (U) / B (V) / C (W)

Standby power: 350 kWVoltage options: 15 configurationsDry weight: 7,046 lb (3,196 kg)

Key specifications

350 kW Standby power
15 configurations Voltage options
A (U) / B (V) / C (W) Phase
7,046 lb (3,196 kg) Dry weight
50 Hz Frequency

Useful generator charts

Charts are shown only when this model has enough usable source data.

Power-to-weight
Standby output per 1,000 lb of dry weight versus similar-output Cummins Onan models.
This model

49.7 kW

Peer average

45.1 kW

78th percentile
Power output
Low 320 kW High 350 kW
Standby

350 kW

Prime

320 kW

Model spec snapshot
Representative numeric specifications from this generator.
350 kWStandby
7,045.97 lbWeight

How the Cummins Onan C350 D5 compares

This compares the supplied numeric specification with Cummins Onan generators in the same broad standby-power class where enough comparable data exists.

Standby power
350 kW
50% above avg
91st percentile
Dry weight
7,046 lb
19% above avg
71st percentile
Oil capacity
10.57 gal
38% above avg
89th percentile
Standby power350 kW
Low 150 kWAverage 232.8 kWHigh 354.6 kW

About 50% above the similar-output Cummins Onan average. Around the 91st percentile for this field.

Dry weight7,046 lb
Low 2,199 lbAverage 5,923 lbHigh 12,467 lb

About 19% above the similar-output Cummins Onan average. Around the 71st percentile for this field.

Oil capacity10.57 gal
Low 1.81 galAverage 7.66 galHigh 13.73 gal

About 38% above the similar-output Cummins Onan average. Around the 89th percentile for this field.

This model Peer average

Generator information

Manufacturer Cummins Onan
Model C350 D5
Generator type Generator
Frequency 50 Hz

Electrical output

Standby power 350 kW
Prime power 320 kW
Standby kVA 350.0
Voltage options 277 V, 480 V, 220 V, 380 V, 254 V, 440 V, 127 V, 240 V, 416 V, 115 V, 200 V, 230 V, 400 V, 110 V, 190 V
Phase A (U) / B (V) / C (W)

Engine, cooling and controls

Engine model Cummins/Onan NT855
Engine displacement 854 cu in (14 L)
Aspiration / cooling Turbo Charged
Rated engine speed 1800 rpm
Engine oil capacity 10.6 gal (40 L)
Engine coolant capacity 13.5 gal (51 L)
Oil capacity 10.6 gal (40 L)
Coolant capacity 32.2 gal (122 L)
Controller PowerCommand

Physical specifications

Dry weight 7, 046 lb (3, 196 kg)
Dimensions (L × W × H) 139.7 × 43.3 × 81.8 in (3549 × 1100 × 2078 mm)

Battery

Battery voltage 24 V

Maintenance and service parts

Engine oil Interval: 100 hr; Capacity: 10.0 gallons
Oil filter Interval: 1000 hr
Fuel filter Interval: 500 hr
Air filter Interval: 1000 hr; Specification: If the engine is equipped with an oil bath type air cleaner, fill to the level indicated with oil of the same viscosity as used in the crankcase. However, a non-detergent (straight mineral) oil is recommended.
Coolant Interval: 5000 hr; Specification: For units which use either a radiator or heat exchanger (city water cooled), fill the cooling system with clean soft water, The standard radiator and block capacity is 21 U.S. gallons. Use a good rust and scale inhibitor. If there is any possibility of a radiator cooled plant being exposed to freezing temperatures, use antifreeze with ethylene glycol base as instructed in the Cummins manual.; Capacity: 80.63 L

Disclaimer: Specifications should be verified against the official owner’s or service manual and confirmed on the Cummins North America generator website.

Ernie Lo

Ernie Lo is a qualified web designer and web developer. He works as an IT support technician and website manager at Benleigh Vending, and he also fixes vending machines.

Recent Posts