Home » Appliances » Cummins Onan C350 D6 Specs (Power | Fuel Consumption)

Cummins Onan C350 D6 Specs (Power | Fuel Consumption)

The Cummins Onan C350 D6 generator is listed with standby output of 360 kW, Diesel fuel, 50 Hz operation, 3 available voltage configurations, and A (U) / B (V) / C (W).

Cummins Onan Generator Specifications

Generator • Diesel • 50 Hz • A (U) / B (V) / C (W)

Standby power: 360 kWVoltage options: 3 configurationsDry weight: 4,504 lb (2,043 kg)

Key specifications

360 kW Standby power
Diesel Fuel
3 configurations Voltage options
A (U) / B (V) / C (W) Phase
4,504 lb (2,043 kg) Dry weight
50 Hz Frequency

Useful generator charts

Charts are shown only when this model has enough usable source data.

Power-to-weight
Standby output per 1,000 lb of dry weight versus similar-output Cummins Onan models.
This model

79.9 kW

Peer average

45.1 kW

94th percentile
Power output
Low 324 kW High 360 kW
Standby

360 kW

Prime

324 kW

Model spec snapshot
Representative numeric specifications from this generator.
360 kWStandby
4,504.04 lbWeight

How the Cummins Onan C350 D6 compares

This compares the supplied numeric specification with Cummins Onan generators in the same broad standby-power class where enough comparable data exists.

Standby power
360 kW
55% above avg
99th percentile
Dry weight
4,504 lb
24% below avg
36th percentile
Oil capacity
9.7 gal
27% above avg
71st percentile
Standby power360 kW
Low 150 kWAverage 232.8 kWHigh 354.6 kW

About 55% above the similar-output Cummins Onan average. Around the 99th percentile for this field.

Dry weight4,504 lb
Low 2,199 lbAverage 5,923 lbHigh 12,467 lb

About 24% below the similar-output Cummins Onan average. Around the 36th percentile for this field.

Oil capacity9.7 gal
Low 1.81 galAverage 7.66 galHigh 13.73 gal

About 27% above the similar-output Cummins Onan average. Around the 71st percentile for this field.

This model Peer average

Generator information

Manufacturer Cummins Onan
Model C350 D6
Generator type Generator
Fuel Diesel
Frequency 50 Hz

Electrical output

Standby power 360 kW
Prime power 324 kW
Standby kVA 450.0
Voltage options 480/277 V, 380/220 V, 220/127 V
Phase A (U) / B (V) / C (W)
Power factor 0.8

Engine, cooling and controls

Engine model Cummins/Onan NTA855-G5
Engine displacement 854 cu in (14 L)
Aspiration / cooling Turbocharged
Rated engine speed 1800 rpm
Engine coolant capacity 15.3 gal (58 L)
Oil capacity 9.7 gal (36.7 L)
Coolant capacity 5.49 gal (20.8 L)
Maximum ambient 171 °F (77 °C)
Controller PowerCommand
Alternator QSG12-G3

Physical specifications

Dry weight 4, 504 lb (2, 043 kg)
Dimensions (L × W × H) 132.7 × 59.1 × 129.8 in (3370 × 1500 × 3296 mm)

Battery

Battery voltage 24 V

Fuel system and runtime

Fuel tank 144 gal (545 L)

Fuel consumption

Standby 110 L/h @ 100%

Maintenance and service parts

Engine oil Interval: 100 hr; Capacity: 10.0 gallons
Oil filter Interval: 1000 hr
Fuel filter Interval: 500 hr
Air filter Interval: 1000 hr; Specification: If the engine is equipped with an oil bath type air cleaner, fill to the level indicated with oil of the same viscosity as used in the crankcase. However, a non-detergent (straight mineral) oil is recommended.
Coolant Interval: 5000 hr; Specification: For units which use either a radiator or heat exchanger (city water cooled), fill the cooling system with clean soft water, The standard radiator and block capacity is 21 U.S. gallons. Use a good rust and scale inhibitor. If there is any possibility of a radiator cooled plant being exposed to freezing temperatures, use antifreeze with ethylene glycol base as instructed in the Cummins manual.; Capacity: 80.63 L

Disclaimer: Specifications should be verified against the official owner’s or service manual and confirmed on the Cummins North America generator website.

Ernie Lo

Ernie Lo is a qualified web designer and web developer. He works as an IT support technician and website manager at Benleigh Vending, and he also fixes vending machines.

Recent Posts