How to Fix Hisense TV Blinking Lights

Why does my Hisense TV lights keep blinking? 

The main reason your Hisense TV lights keep blinking is because of a powerboard failure,the TV is stuck on standby, or a faulty internal LED panel.

 

Powerboard Failure

One of the causes of your Hisense TV lights blinking could be a powerboard error or failure. When the powerboard fails, your Hisense television will have internal problems.

The power board might fail due to a faulty capacitor, fuse, or blown-out component. Swollen caps are a typical cause of a defective power board.

Another example is some burned capacitors. Whatever the case, it’s a little more serious than the other problem, which will also need expert treatment.

 

Stuck On Standby

The main reason why your Hisense TV lights might be blinking could be because it is stuck on standby mode.

Sometimes your television may go into standby mode. This can happen at any time after watching television for a while.

In this situation, the red light on the power button may flicker, but it will not respond to the remote control or working buttons.

 

LED Panel Issue

While this reason may not be as common, your Hisense lights may keep blinking because of an internal LED panel issue.

It’s an unusual problem that might be the source of your problem. In this instance, your television should continue to operate correctly.

However, there will always be a red light blinking on the power button. This is where the LED panel may encounter difficulties. The solutions to this are likewise simple, but they can be a little complicated.

 

 

How do I fix a Hisense TV screen that keeps blinking? 

To fix your Hisense TV screen that keeps blinking, you will need to get the power board fixed, reset your TV or fix the LED panel.

 

Power Board Fixed

If the problem is a faulty power board in your Hisense TV, you may inspect it yourself. Remove the tv’s back panel and search for the power board.

If you see any damage or burned-out components, you will need to replace the power board to resolve this issue.

Are you not sure about it? So, hire a technician to conduct the task because you don’t want to delve into all the technical jargon without first learning the basics.

The majority of the time, the remedy to this problem is to replace the power board.

 

Reset Your TV

This is a relatively simple problem to resolve on your Hisense television. All you have to do is reset your television, and you should resolve the problem. Here’s how to reset your television to resolve the issue.

Unplug your television from the wall. Maintain this position for 10 to 15 minutes. Then, for roughly one minute, press and hold the TV power button.

Then connect your television and turn it on. This resets the television, and it should now function normally.

 

Fix LED Panel

The light array or board of your television, like the power board, might fail. It’s not as severe as the power board, but it’s still aggravating.

To resolve this issue, remove the LED light panel and replace it with a new one. The Hisense TV blinking red light is a minor issue that may be resolved quickly.

All of the fixes and remedies are quite common. The good news is that you don’t have to spend a lot of money to address the problems.

 

What does it mean when my Hisense TV power light is blinking? 

What it means when your Hisense TV Power light is blinking is that there might be some software issues internally causing it. 

 

One of the primary causes of Hisense TVs blinking red is software difficulties. If you have outdated firmware, the TV may display this light if it detects security or compatibility concerns.

Some software issues can potentially interfere with signal transmission and cause this issue.

 

Why is my Hisense TV blinking and not turning on?? 

The reason why your Hisense TV is blinking and not turning on could be because of an HDMI cable error. 

Your gaming console or other connected gadgets may prevent your TV from turning on through an HDMI input.

This problem can occur if your console is shut down without first changing the source of the HDMI input.

 

To check for source issues, take the following steps:

1. Check that the source is turned on.
2. If it’s an HDMI issue, unplug the HDMI cable.
3. In Settings, disable Anynet+.
4. If nothing works, you can do a soft reset.

 

Hisense Smart TV blink codes 

Hisense Smart TV blink codes denote different messages and errors for the user. For instance, a red light that flashes twice shows a TV hardware that is malfunctioning. Whereas a red light flashing thrice means the internal circuit board is damaged.

 

Below, we discuss your Hisense Smart TV blink codes in detail:

Colour	Number of Flashes	Meaning
Red	Flashes 2 times	TV hardware is malfunctioning
Red	Flashes 3 times	Internal circuit board damaged
Red	Flashes 5 times	Faulty cable connection
Red	Flashes 6 times	Major systematic error
Red	Flashes 7 times	Circuit stage error
Red	Flashes 8 times	Hardware fault
Red	Flashes 10 times	The incorrect voltage supply to the TV

 

 

Why does my Hisense TV screen keep flickering on and off?? 

The reason why your Hisense TV screen keeps flickering on and off could be because of an internal system error. 

1. The first step in resolving this problem is to restart your device.
2. Please turn off the device, wait 30 to 60 seconds, and then turn it back on.
3. If this resolves the problem, the gadget only needs to be reset.
4. If this does not resolve the problem, it is likely that your internet connection is weak and is producing the Hisense TV error.

Why is my Hisense TV power light blinking? 

The reason why your Hisense TV power light is blinking could be damaged on the board. Some component or another may have failed. 

If you have a basic understanding of how electronic components function and how they should appear, you may open the TV to inspect it.

How do I reset my Hisense TV if it won’t turn on? 

To reset your Hisense TV if it won’t turn on, you can use two methods depending on the Hisense model you own.

1. To reset the Smart TV, press and hold the ‘EXIT’ for 15 seconds.
2. The Hisense TV menu will show after 15 seconds.
3. Turn off the TV by clicking ‘OK.’
4. It is best to wait 20 seconds after resetting your Smart TV before turning it on.
5. This method is only applicable to 2013 and earlier models.

To reset Hisense TV with a remote, follow these steps:

1. On your remote, press MENU.
2. Select ‘Support’ and confirm your choice by pressing ‘Enter.’ Depending on the model of your remote, the ‘Enter’ key may display as the ‘OK’ or ‘Select’ key.
3. Click “Self Diagnosis” and then click “Enter.”
4. Choose the final option, ‘Reset.’
5. To confirm your request, enter your security PIN.
6. Restore the factory settings on your Hisense Smart TV.
7. If you have never changed your PIN on a Hisense Smart TV, the default PIN is 0000.

What causes a Blinking Hisense TV Logo? 

The cause for a blinking Hisense TV logo could be that your TV is on Power Saving Mode, which can cause problems when on for a prolonged period. 

To solve this issue, you can use the following steps:

1. Navigate to the Hisense TV’s Settings menu.
2. Navigate to Picture.
3. Choose Energy Saving.
4. Now, select another setting that will assist you in resolving the issue.
5. You may test each option to see whether it works.

How to fix Hisense TV flickering horizontal lines? 

To fix Hisense TV flickering horizontal lines, you will need to update the software version of your TV.

When a software update is available, you should upgrade your TV’s firmware version. A software update may include various repairs and changes that will improve the functioning of your television.

1. The first thing you should do is check to see if your Hisense TV has the most recent software upgrades.
2. If the TV is still new, you should check for updates more frequently.
3. This is simple to accomplish by simply using your remote control to navigate to the Home screen and then to the Settings menu page.
4. In the Support section, you will see the option to check for updates. Download any available updates.
5. Check to see if it has been updated to the newest version once the updates have been correctly deployed.
6. It would be best if you then restart your Hisense TV, and you will find the lines gone.

Why does my Hisense TV blink a black screen? 

The reason why your Hisense TV is blinking a black screen is that the input cable may not be connected properly. 

1. The issue with the input cable connection is a typical one that you may readily remedy by verifying the input HDMI cable connection.
2. To test the input cable connection, ensure that it is attached to the right input port.
3. If the problem persists, reconnect the input cord to the relevant input HDMI port. If the problem persists, try a different input port.
4. If the problem persists, try connecting another device to the input port to rule out the input port as the source of the problem.
5. If the problem persists, servicing may be necessary.

Why does my Hisense TV flash a green screen? 

The reason why your Hisense TV is flashing a green screen is because of a TV panel defect. A panel problem involves your television’s screen. 

1. If your screen has been physically damaged, you should get it repaired by a specialist.
2. To determine whether the problem is with the panel, you must first do the troubleshooting procedures.
3. If it is a panel issue, the problem will persist until the panel of your Hisense LED TV is replaced.

Why is my Hisense TV red light blinking? 

The reason why your Hisense TV’s red light is blinking is because of an error in the power supply units.It is used to transform the electricity from the source into other forms and voltages.

Simply put, it controls voltage and power.

1. Now, if the PSU voltage dips, the Hisense TVs will not turn on.
2. This might be one of the causes of your TV not turning on.
3. So attempt to determine the voltage supply.
4. If the voltage is less than 4.5 volts, it is best to disconnect the main power cord from the supply socket.

Why is my Hisense TV flashing an orange light?? 

The reason Hisense TV is flashing an orange light that is because your TV may be on sleep timer mode. 

A solid Orange/Amber light indicates that a timer has been set and that the television is on.

1. Timers may be established, altered, or switched on/off in the television’s settings menu.
2. If it’s on sleep Timer, then your Hisense television will switch off after a certain length of time.
3. If it’s on an On/Off Timer, then it turns the TV on and off at predetermined times of the day.

Why is my Hisense TV flashing a yellow light? 

The reason why your Hisense TV is flashing a yellow light is that it may require a software update. This occurs only if your television is linked to an active high-speed Internet connection.

1. During a software update, do not switch off the television or disconnect the power.
2. While an update is being downloaded/installed, your remote control will not function.
3. It may take a few minutes to download and install updates. Please bear with us. After the update is completed, the TV will resume regular functionality.

Why is my Hisense TV flashing a white light?? 

The reason why your Hisense TV flashes a white light is that your TV is receiving signals from your remote control.

When you push a button on the remote control, a white light blinks to indicate that the TV is receiving the signal. This function is not available on all televisions.

Some recent televisions contain a White LED in the lower centre of the screen. This LED can be turned off in the system settings if desired.

How to fix Hisense TV power light blinking but has no picture 

To fix a Hisense TV power light that is blinking but showing no picture, there may be an unstable or loose cable connection causing the disruption. 

1. Check that all of the wires are properly attached.
2. This problem might develop when the wires get misplaced or loose.
3. Check and correct if this is the case.

Why does my Hisense TV power light fade out? 

The reason why your Hisense TV power light fades out is that your TV may be in eco-lighting mode.

This mode dims any lights by using the sensor to sense the lighting around you. If you are in a dimly lit setting, then the lights will fade out to save power.

You can turn this feature off by going to your TV settings.