The Generac MB600 – GEM compressor is listed with standby output of 600 kW, Bi-Fuel fuel, 60 Hz operation, 277/480 V, 600 V output, and Three phase.
Generac Generator Specifications
Generator • Bi-Fuel • 60 Hz • Three phase
Standby power: 600 kWVoltage: 277/480 V, 600 V
Key specifications
600 kWStandby power
Bi-FuelFuel
277/480 V, 600 VVoltage
Three phasePhase
60 HzFrequency
Visual model specs
Built only from this model’s supplied generator specifications.
Fluid capacities
Low 8.19 gal High 11.62 gal
Oil
8.19 gal
Coolant
11.62 gal
How the Generac MB600 – GEM compares
This compares the supplied numeric specification with Generac generators in the same broad standby-power class where enough comparable data exists.
Standby power
600 kW
In line with avg
57th percentile
Oil capacity
8.19 gal
56% below avg
23rd percentile
Standby power600 kW
Low 400 kWAverage 595.9 kWHigh 900 kW
Very close to the similar-output Generac average. Around the 57th percentile for this field.
Oil capacity8.19 gal
Low 7.13 galAverage 18.49 galHigh 47.55 gal
About 56% below the similar-output Generac average. Around the 23rd percentile for this field.
This model Peer average
Generator information
| Manufacturer | Generac |
|---|---|
| Model | MB600 – GEM |
| Generator type | Generator |
| Fuel | Bi-Fuel |
| Frequency | 60 Hz |
Electrical output
| Standby power | 600 kW |
|---|---|
| Voltage options | 277/480 V, 600 V |
| Phase | Three phase |
| Power factor | 0.8 |
| Circuit breaker | 600 A |
Engine, cooling and controls
| Oil capacity | 8.19 gal (31 L) |
|---|---|
| Coolant capacity | 11.6 gal (44 L) |
| Maximum ambient | 122 °F (50 °C) |
| Controller | PowerManager Digital Platform, PowerManager Digital Platform (PM-DCP) |
Battery
| Battery group | 27F |
|---|---|
| Battery cranking | 700 CCA |
| Battery voltage | 12V V |
| Battery quantity | 2 |
Disclaimer: Specifications should be verified against the official owner’s manual and confirmed on the Generac USA website.