Home » Appliances » Generac MB600 Specs (Power | Voltage | Weight)

Generac MB600 Specs (Power | Voltage | Weight)

The Generac MB600 compressor is listed with standby output of 600 kW, Bi-Fuel fuel, 60 Hz operation, 277/480 V, 346/600 V output, and Three phase.

Generac Generator Specifications

Generator • Bi-Fuel • 60 Hz • Three phase

Standby power: 600 kWVoltage: 277/480 V, 346/600 V

Key specifications

600 kWStandby power
Bi-FuelFuel
277/480 V, 346/600 VVoltage
Three phasePhase
60 HzFrequency

Visual model specs

Built only from this model’s supplied generator specifications.

Power output
Low 540 kW High 600 kW
Standby

600 kW

Prime

540 kW

Fluid capacities
Low 11.89 gal High 15.48 gal
Oil

11.89 gal

Coolant

15.48 gal

How the Generac MB600 compares

This compares the supplied numeric specification with Generac generators in the same broad standby-power class where enough comparable data exists.

Standby power
600 kW
In line with avg
57th percentile
Oil capacity
11.89 gal
36% below avg
52nd percentile
Standby power600 kW
Low 400 kWAverage 595.9 kWHigh 900 kW

Very close to the similar-output Generac average. Around the 57th percentile for this field.

Oil capacity11.89 gal
Low 7.13 galAverage 18.49 galHigh 47.55 gal

About 36% below the similar-output Generac average. Around the 52nd percentile for this field.

This model Peer average

Generator information

Manufacturer Generac
Model MB600
Generator type Generator
Fuel Bi-Fuel
Frequency 60 Hz

Electrical output

Standby power 600 kW
Prime power 540 kW
Standby kVA 750.0
Voltage options 277/480 V, 346/600 V
Phase Three phase
Power factor 0.8

Engine, cooling and controls

Oil capacity 11.9 gal (45 L)
Coolant capacity 15.5 gal (58.6 L)
Maximum ambient 122 °F (50 °C)
Controller Digital G-200, PowerManager Digital Platform
Alternator K0792124Y23 (4-pole, Class H insulation)
Emissions Stationary Emergency

Battery

Battery voltage 12 VDC V
Battery quantity 2

Disclaimer: Specifications should be verified against the official owner’s manual and confirmed on the Generac USA website.

Ernie Lo

Ernie Lo is a qualified web designer and web developer. He works as an IT support technician and website manager at Benleigh Vending, and he also fixes vending machines.

Recent Posts