Why Does My JBL Xtreme 3 Speaker Keep Disconnecting?
The main reason why a JBLXtreme 3 speaker can keeo disconnecting is because of low battery levels, outdated firmware, electrical interference, or a damaged circuit board.
Table of Contents
Potential Causes:
- Low Battery
- Electrical Interference
- Outdated Firmware
- Faulty Power Button
- Cache Files
- Hardware Issues
- Poor Bluetooth connection
Low Battery
If your JBL Xtreme 3 keeps turning off automatically, it is probably due to a low battery. Just like all other electronic devices, your JBL speaker also needs electricity to work. In case you haven’t connected your device to an AC adapter for a few hours, it will run out of juice.
Electrical Interference
Furthermore, if your JBLXtreme3 speaker is near other electronic devices, such as television and microwave, the radio waves can interfere with the Bluetooth connection. As a result of this electrical interference, your smartphone or computer can lose connection with your JBL speaker.
Outdated Firmware
Just like your smartphone, JBLXtreme3 speaker also comes with firmware consisting of several programs and software. If you are using your speaker on outdated firmware, you can encounter some software-related issues, including random disconnections.
Faulty Power Button
JBL Xtreme 3 might be durable, but it is still an electronic device, meaning it is prone to hardware issues. Sometimes, the power button of your speaker gets stuck in place, turning on and off your device automatically.
Cache Files
When you connect your JBL Xtreme 3 with other electronic devices, both devices share lots of data. This data transmission uses the limited memory of your speaker and creates cache files. If your device is loaded with cache files, it won’t be able to share more data, leading to constant disconnections.
Hardware Issues
Besides a faulty power button, there are several hardware-related issues that can cause your JBL speaker to disconnect. For instance, if you have recently dropped your device, it might have damaged the circuit board.
Poor Bluetooth Connection
JBL Xtreme 3 speaker can be connected to other devices using a Bluetooth connection. Keep in mind that Bluetooth is not known for long-range connections. If both your devices are too far away from each other, they will undoubtedly get disconnected.
Why JBL Xtreme 3 Keeps Cutting Out?
If your JBL Xtreme 3 speaker keeps cutting out, it is probably due to poor Bluetooth connection caused by electrical interference or long distance.
How to Fix It:
- Fully charge your speaker
- Keep your speaker away from electronic devices
- Reconnect with Bluetooth
- Keep both devices within 100 feet
- Update the firmware
Why JBL Xtreme 3 Keeps Skipping Audio?
JBL Xtreme 3 might be skipping audio because both of your devices are too far away from each other, or there are other electronic devices near your speaker.
How to Fix It:
- Avoid electrical interference
- Reconnect with Bluetooth
- Restart your speaker
- Keep both devices close to each other
- Check for software update
How To Fix JBL Xtreme 3 Speakers That Keep Disconnecting
You can fix a JBL Xtreme 3 speaker that keeps disconnecting by restarting it to clear the cache, updating the firmware, or fixing the hardware issues.
Restart JBLXtreme 3 [Method 1]
- Unplug your device
- Press and hold the power button for 5 seconds
- Let it rest for 30 seconds
- restart it and reconnect with Bluetooth
Charge Your Speaker [Method 2]
Sometimes, all you need to do is charge your speaker to fix the disconnecting issue. If your device is out of juice, it won’t be able to maintain a stronger Bluetooth connection. So, connect it to the power adapter and charge your speaker.
Update The Firmware [Method 3]
- Connect your JBL Xtreme 3 to your smartphone
- Open the “JBL Connect+” app
- Select your speaker
- Click on the “Orange Bubble”
- Press “OK” to update the firmware
Reconnect With Bluetooth[Method 4]
The poor Bluetooth connection can affect your listening experience. In that scenario, all you need to do is reconnect your speaker to other devices using Bluetooth settings. Make sure to keep both devices close to each other.
Factory Reset [Method 5]
- Power on your JBL Xtreme 3
- Press/hold the volume up and play buttons
- Maintain this position for at least 5 seconds
- Your device will get its default settings
- Reconnect it to your device
Get Your Speaker Fixed [Method 6]
If none of the above-mentioned methods work for you, your JBL Xtreme 3 speaker might be disconnecting due to hardware issues, such as a damaged circuit board. In that scenario, you should get your device fixed by a professional.
If your device is under warranty, it would be an economical choice to visit JBL electronic store. Otherwise, you can contact a local expert to fix your speaker.
Why Does My JBL Xtreme 3 Speaker Keep Turning Off?
If your JBL Xtreme 3 speaker keeps turning off, it might be due to a low battery, faulty power button, or issues with the circuit board.
How to Fix It:
- Fully charge your speaker
- Check the power button
- Avoid electrical interference
- Check for hardware issues
- Update the firmware
Why Does My JBL Xtreme 3 Speaker Keep Disconnecting From WiFi?
Your JBL Xtreme 3 speaker might be disconnecting from WiFi because of poor wireless connection or outdated firmware.
How to Fix It:
- Avoid electrical interference
- Restart your speaker
- Reboot the modem or router
- Reconnect with WiFi
Why JBL Xtreme 3 Speaker Keeps Disconnecting From Bluetooth?
If your JBL Xtreme 3 speaker keeps disconnecting from Bluetooth, it is probably due to bugs in the Bluetooth app or poor Bluetooth connection.
How to Fix It:
- Restart JBL Xtreme 3
- Update the firmware
- Update the OS on your device
- Check Bluetooth driver
- Keep your devices within 100 feet
How To Remove JBL Xtreme 3 Speaker Static Buzzing Noise?
The poor Bluetooth connection can influence your experience by creating static or buzzing noise on JBL Xtreme 3 speaker.
How to Fix It:
- Restart your device
- Reconnect with Bluetooth
- Update the firmware
- Keep both devices close to each other
- Avoid electrical interference
JBL Xtreme 3 Not Connecting To PC
If your JBL Xtreme 3 speaker is not connecting to your computer, it is because of the outdated Bluetooth drivers.
How to Fix It:
- Open “Search Bar”
- Type “Device Manager”
- Find “Bluetooth Adapter”
- Right-click on it
- Select “Drivers”
- Click on “Uninstall”
- Restart your computer
- Reconnect with JBL Xtreme 3
JBLXtreme3 Not Connecting With iPhone
If you are unable to connect your JBL Xtreme 3 with an iPhone, it is probably due to outdated firmware or iOS and poor Bluetooth connection.
How to Fix it:
- Restart JBL Xtreme 3
- Update the firmware
- Update your iOS
- Reconnect with your iPhone
Update The IOSVersion
- Go to “Settings”
- Select “General”
- Find and Select “Software Update”
- Tap on “Automatic Updates”
- Turn On to download and install iOS updates
- Once done, Open Bluetooth settings
Connect JBLXtreme3 With iPhone
- Turn on your speaker
- Press the Bluetooth button
- Ensure your speaker isn’t connected with other devices
- Open Bluetooth settings on iPhone
- Find the “JBL Xtreme 3”
- Select the speaker to connect
JBL Xtreme 3 Not Connecting With Samsung Galaxy Phone
If your JBL Xtreme 3 speaker is not connecting with Samsung or other Android phones, it is due to Bluetooth bugs and poor Bluetooth connection.
How to Fix It:
- Restart your speaker
- Update the firmware
- Reset the network settings
- Reconnect your speaker to your phone
Connect JBLXtreme3 With Samsung Galaxy Phone
- Charge your speaker
- Turn on and press the Bluetooth button
- Navigate to “Settings” on Samsung Galaxy
- Go to “Bluetooth”
- Look for “JBL Xtreme 3”
- Tap to pair
- Enter “0000” to pair the device
Reset The Network Settings
- Open “Settings”
- Go to “General Management”
- Select “Reset”
- Find and choose the “Reset Network Settings”
- Tap on “Reset Settings”
- Confirm the action
Headings, subheadings and some general steps detected in Copyscape from client’s own website.