(SOLVED) Why is my PC Not Booting After Changing RAM Speed?

Why is my computer not booting after changing RAM speed?

The main reason why a computer is not booting after changing RAM speed is because of the Incompatible RAM with the motherboard or the RAM sticks not seated properly in their slots.

Table of Contents

Here is a roundup of the factors that cause your computer not to boot even after a significant change in RAM speed:

Wrong RAM slots
Issues related to CMOS battery
RAM sticks are not seated properly
RAM unable to adapt to the working motherboard
Installing bad RAM sticks
RAM adapting to the motherboard

Wrong RAM slots

Computers with four RAM slots will give you slight trouble when installing RAM. It is because there are certain combinations that you have to follow. The failure to follow these combinations will result in a few problems with your computer’s working.

For example, if there are four slots labeled as 1, 2, 3, and 4, you will have to insert RAM sticks in 1 and 2. If you insert it in 3 or 4, the computer will not work properly.

Issues related to CMOS battery

The CMOS battery is the main engine of your computer system. Any problems in the battery will cause serious disruptions in the otherwise smooth working of your computer.

RAM sticks are not seated properly

The computer’s hardware should be installed properly and with attention to detail. If RAM sticks are not laid down properly, they won’t work.

As a result, the computer will keep turning on and off. You will have to ensure that the sticks fit perfectly into their slots to avoid this problem.

RAM unable to adapt to the motherboard

Many computer owners think that all RAMs are compatible with all motherboards. This isn’t the case.

If you recently installed RAM and found out that the computer is still showing problems, you should consider determining if it is compatible with your motherboard.

Installing bad RAM sticks

Bad RAM sticks also cause many problems for your computers and frequently force them to turn off.

If you have installed bad RAM sticks into your computer and it keeps turning off, you shouldsee if there are any bad sticks.

RAM adapting to the motherboard

After installing new RAM sticks, the PC turns off as part of the installation process. This step lets the newly installed RAMs effectively adapt the motherboard’s working.

How to Fix a PC that Keeps Turning Off after Changing RAM Speed

To fix a computer that keeps turning off after the RAM speed has been changed, you need to reset CMOS, reseat the RAM sticks and upgrade the RAM frequency.

Here are some methods that you can try to get rid of the problem and use your PC without any disturbance:

Resetting RAM
Checking the right pair
Replacing bad RAM sticks
Upgrading RAM frequency
Resetting CMOS
Reseating RAM sticks

Resetting RAM [Method 1]

There is software called RAM Def 2.6 Xtreme. It is free and is tested for viruses or other malware:

Download it and unzip the file.
This step will allow you to install it on your computer.
You will have to follow some on-screen instructions to install the software, which will take around 5 minutes.
Once the process is over, you can start it and let it run in the background.

Checking The Right Pair [Method 2]

If your computer has four RAM slots, it will require a certain combination of the RAM slots:

In some cases, the computer works best if RAM sticks are seated in slots 1 and 2.
You will have to find out which combination works best for your computer and place the sticks accordingly.

Replacing Bad RAM Sticks [Method 3]

Faulty RAM sticks may cause some interruption in your computer, forcing it to shut down.

This issue can be resolved if you:

Locate the faulty stick.
Take it out and replace it with a new one.

Upgrading RAM Frequency [Method 4]

If you have installed a RAM that is incompatible with your computer, you will have to upgrade its frequency.

Restart the computer.
Enter the BIOS. (You can refer to the manual that came with your computer to see how this step can be carried out.)
Go to the Advanced Chipset section.
Search for RAM frequency settings.
Set it to the amount compatible with your computer.
Choose the Save and Exit buttons.

Resetting CMOS [Method 5]

The CMOS battery runs the entire computer system. Any problem with the battery may result in frequent turning off of the computer.

To fix it:

Disconnect all the devices to which your computer is connected.
Remove the power supply.
Remove the cover of the CPU.
Take out the battery.
Insert the battery after waiting for at least five minutes – this step will reset the battery.
Cover the CPU again and reconnect all the devices.
Turn on the power supply to see how the battery works.

Reseating RAM Sticks [Method 6]

Improperly seated RAM sticks also cause problems in the working of your computer. How can you fix it?

The answer lies in the following steps:

Remove the sticks from their slots.
Insert them in the slots again. Exert a little more pressure.
Ensure that the pins on the slot and the RAM sticks have been locked together.

Why Does My Computer Keep Turning Off After Changing RAM Speed?

A computer may turn off after changing its RAM speed as part of the installation process. If the problem persists, it can be because the RAM sticks are inserted in the incorrect slots.

Why PC Won’t Boot WithHigher RAM Speed

A PC won’t boot with higher RAM speed if its motherboard isn’t compatible with RAM sticks, new RAM sticks are not seated properly in their slots or RAM sticks are defeated.

To resolve the problem you need to:

Removing the pre-installed RAM and using only the new ones.
If the PC doesn’t boot properly, you’d know it is incompatible with the new RAM sticks you’ve bought.
You can also consider cleaning the RAM slots with the help of a hand-held blower to remove dust, if any.
If you have mistakenly installed more RAM, you will have to enable XMP to set RAM frequency.

Why Won’t My Computer Boot WithDOCP Enabled?

If your modules aren’t installed in the right slots, you should seat them in the A2 and B2 slots.

To resolve the problem, you should:

Insert them in their correct slots.
Also, check if you have the latest BIOS version for the motherboard.
These steps can help fix the problem in the shortest time possible.

Why Is My PC Freezing AndCrashing After Changing RAMSpeed?

You may have inserted RAM sticks into the wrong slots. If you mix the old and new DIMMS in the same machine, it may pose a few problems. Another cause for this problem could be faulty RAM sticks:

Get your RAM sticks exchanged and insert a new one for better performance.
Ensure that the sticks are installed in the right slots, which should be 1 and 3, not 1 and 3.

Why Is My RAM Speed Not Changing After XMP?

If XMP doesn’t work, users can try manually overclocking the RAM.

To do this:

Select the voltage – you can start with 1.2 V.
Set RAM frequency to 3600 MHz.
Save and exit.
Check the clock speed again.
If RAM is not at 3600 MHz, increase the voltage to 1.21 v by going back to BIOS.
Repeat the steps until the speed reaches the 3600 MHz mark [Tip: be careful and don’t let the voltage cross the 1.3v-1.35v slab.

Do You Need to Set RAM Speed In BIOS?

You need a well-functioning RAM to run your computer properly for your gaming needs and browsing requirements. It can be done by enabling XMP in BIOS and setting your RAM speed at 3200 Mhz.

Why Windows 11 BIOS Won’t Let Me Change RAM Speed

If your computer is not letting you change your RAM speed, there are high chances that it is not compatible with the RAM.

Enable the Advanced Settings option.
Enable XMP.
In case you’re given options, select Profile 1.
XMP will set up RAM sticks.

How to Change RAM Speed in BIOS

Changing RAM speed in BIOS is easy and doesn’t require much hard work.

You can follow these steps to change the speed:

Reset to default in BIOS.
Change the AI Overclock Tuner setting to manual.
Go to Dram frequency and select 3000MHz.
Go to Dram voltage and set it to 1.35V.
Go to CPU system agent voltage and set it to 1.2V.

Why Does My PC Have No Display After Changing RAM Speed?

This problem may arise because of some error in the CMOS battery, dust in the RAM slots, and faulty RAM sticks.

It can be resolved by:

Resetting the CMOS battery by taking it out for five minutes and inserting it again.
Exchanging the faulty RAM sticks and getting new ones.
Cleaning the RAM slots with the help of a blower.

Why Does My PC Have ABlack Screen After Changing RAM Speed?

One of the main reasons for a black screen on your PC is its incompatibility with your system. Other factors like power issues and faulty RAM slots also result in a black screen.

You can fix it by:

Checking faulty RAM slots through the trial-and-error method.
Finding out which RAM is supported by your computer.
Making sure that all parallel devices are rightly connected.

Why Does My PC Have A Blue Screen After Changing RAM Speed?

This problem occurs when you have two different memory modules on your computer.

You will have to:

Increase memory latency to bring it to a compatible level with the memory speed.
Changing faulty RAMs can also resolve this issue.

Why isn’t my PC Booting with 3200 MHz RAM?

If your PC isn’t booting after you change RAM speed, it could be because of the incompatibility of the RAM with your PC.

Check your PC’s manual to see the RAM speed acceptable for your computer.
Find if there is any dust in RAM slots and clean it.
Reset the CMOS battery and see if the issue has been resolved.

Conclusion

Computer users interested in gaming and other applications that require a high level of RAM usually get their RAM speed changed to have better experiences.

However, once you change your RAM, it is important to look at the possible factors that may cause disruptions in the workings of your computer before proceeding.