Why Is My Beats Studio Buds Making A Weird Noise?
The main reason for weird buzzing noises coming from Beats Studio Buds is because he earbusd aren’t paired correctly with the Bluetooth device or interference from other devices.
Table of Contents
Don’t be alarmed if you own a pair of Beats Studio Buds and are experiencing weird noises like buzzing and static noises.
Let’s take a look at some of the causes of this noise:
- ANC interference
- The beats studio buds and source device connectivity issues
- The Bluetooth device is out of range
- Outdated firmware
- Manufacturing fault in the earbuds
The Beats Studio Buds have an Active Noise Cancellation feature; this feature cancels ambient noises that the buds detect. This allows only the sound coming from the earbuds to reach the user’s ears.
The problem with the ANC feature is that it interferes with other Bluetooth devices. I have mentioned the solution to this problem in the article’s next section.
Sometimes a weird noise will occur when the Bluetooth earbuds aren’t connected properly to the source device.
Connectivity issues can occur when the earbuds are low on battery or Wi-Fi signals in the air, causing some interference.
This interference occurs because Wi-Fi and Bluetooth signals operate at the same ISM radio band. ISM is the bandwidth reserved for Industrial, scientific and medical use.
Bluetooth waves operate in the 2.402 GHz to 2.48 GHz bandwidth, whereas Wi-Fi signals operate in the 2.4 GHz to 5 GHz range.
Sometimes these waves interfere with each other and cause interference in the connectivity.
Bluetooth Out Of Range
The approximate range of Bluetooth devices is 30 feet. If your earbuds and the source device are apart from each other more than 30 feet, then your connection will be hampered, and noise will be distorted.
Firmware is the software program that is installed on a hardware device. If the company launches an update for the firmware, that needs to be updated. Outdated firmware can cause noise distortion.
Even though Beats is a recognized brand owned by Apple and is known for its quality, sometimes products have some manufacturing faults.
The good news is that your beats studio buds will be under warranty for one year, so you can get them replaced easily if there is a manufacturing issue.
Why Are My Beats Studio Buds Making A Buzzing Noise?
Your Beats Studio Budscan be making a buzzing noise due to the ANC interfering with other devices, it can be a manufacturing fault, or one of the components in the earbuds could be damaged.
If you hear buzzing sounds in your buds, don’t be alarmed. There are a few common reasons this can happen; most are fixable, so don’t worry.
- The ANC interferes with other Bluetooth devices close by
- The Bluetooth signals are interfering with other radio waves like Wi-Fi signals
- One of the components of the earbuds has malfunctioned
- Outdated firmware
If you hear buzzing noises from your beats studio buds, the first line of action should be to disconnect them from the device and reconnect them.
How To Fix Buzzing Noise On Beats Studio Buds?
The issue of buzzing noises from your beats studio buds can be resolved by either turning your device on and off, finding external sources of interference, or replacing the earbuds if they are under warranty.
The most common cause of buzzing sounds in headphones is hardware issues, connectivity issues, and external interference from other devices.
If you are experiencing buzzing sounds on your Beats Studio Buds, then there are a few steps you can take to fix this:
- The first step is disconnecting the earbuds from the source device and reconnecting it after a few minutes.
- If the issue isn’t resolved, check the firmware and ensure it’s updated to the latest version.
- If the firmware is updated, turn the ANC on and off to see if it makes a difference.
- Also, check if any device nearby is causing interference; sometimes, Wi-Fi signals, microwave ovens, and other Bluetooth devices can cause interference. Turn off any of these devices or move away from them and check if the buzzing sound is still coming.
- If you’ve tried all these methods and the buzzing sound is still not going away, you can take your buds to an Apple service center, and if it’s still under warranty, they will replace them.
Why Are My Beats Studio Buds Making Static Noise?
Your Beats Studio Buds can make static noise because of interference from other Bluetooth devices or because its too far away from the source device.
Static noises in Bluetooth earbuds and headphones are known as Bluetooth noise. This is a common phenomenon, and it’s nothing to worry about.
However, there can be other reasons as well. Static noises can also occur when the battery level of the earbuds is too low.
- Too many Bluetooth devices nearby cause interference.
- Interference from other radio signals coming from your Wi-Fi, cordless phone, or microwave oven
- Earbuds are running low on battery.
- Bluetooth and source device are out of range.
- Malfunctioning hardware
There is no need to be alarmed if your earbuds make static noises. The first thing you need to do is turn off other Bluetooth devices within a close range. And if you are far away from your source device, move closer or carry the device with you.
How To Fix Static Noise On Beats Studio Buds?
Turn off other Bluetooth devices in your vicinity, keep the source device close to the Beats Studio Buds, and move away from appliances emitting radio waves.
Since Bluetooth waves travel at 2.4 GHz to 2.8 GHz, any other device operating at this frequency will interfere with Bluetooth waves.
There is no need to fret over static noises coming from the Beats Studio Buds.
There is a simple method to resolve this problem:
- First, check the battery level on your earbuds; if the battery is low, then charge it completely. Once charged, you can use them and check if the static noise persists.
- If the noise is still coming, check if nearby Bluetooth devices are turned on. If you spot any, then turn them off.
- If you are in a crowded place and other people’s Bluetooth interferes with yours, then move out of that vicinity to eliminate the static noises.
- If there are no Bluetooth devices nearby, check for household appliances like microwave ovens, cordless telephones, and even Wi-Fi devices.
- If none of these methods work and the static noise persists, it could potentially be a hardware issue. Take your beat studio buds to an Apple store for a replacement.
How To Fix Crackling Noise On Beats Studio Buds?
The crackling noise on Beats Studio Buds can be fixed by turning nearby Bluetooth devices off so they don’t interfere with your Bluetooth waves.
Crackling sounds coming from Beats Studio Buds aren’t something to worry about. This usually occurs due to interference issues from other radio waves in the air traveling at the same wavelength.
I have a simple method to fix this:
- Turn off other Bluetooth devices that are nearby.
- If you are close to appliances like microwave ovens or Wi-Fi devices, then move away as they cause interference in Bluetooth signals.
- If these methods don’t work, there may be a manufacturing fault, and you will have to take your earbuds to an apple store and get them replaced.
How To Fix High Pitched Noises On Beats Studio Buds?
You can fix high pitch noises from the Beats Studio Buds by either turning the ANC off and then turning it on. You can also reset the ANC, which should solve the high-pitched noise issue.
Most users who have complained about this issue have suggested that turning the active-Noise Cancellation feature off has removed the high-pitched sound.
If your Beats Studio Buds are making a high pitched sound, then follow the steps below to fix the problem:
- If you hear a high pitched sound from your earbuds, you can solve this problem by turning the active noise cancellation feature off from your device’s settings
- If the high-pitched sound persists, you need to take the earbuds to an apple store and replace them.
Beats Studio Buds Making Noise While Moving?
The main reason why Beats Studio Buds can make noise while you’re moving is becuse your device is out of range or because of interference from other radio waves.
When you are wearing your beats studio buds and moving around, you could be moving away from the source device, moving in the vicinity of other Bluetooth devices, or moving closer into an area with Wi-Fi signals or microwave oven signals.
To fix this problem, follow the step below:
- When moving with your Beats earbuds, make sure the source device is nearby and you don’t move away from it.
- If you enter a new area and suddenly notice that the buds are making a noise, you may have entered the vicinity with other radio waves. Try to move away from this area, and the problem should resolve.
- If none of these methods work, then there may be a hardware issue, and you would have to take the earbuds to an apple store where they will replace them if under warranty.
Beats Studio Buds Static Noise In Left Ear?
The reason for hearing static noise in the left ear of your Beats Studio Buds is due to interference from other Bluetooth devices or a hardware issue.
Static sounds from Bluetooth earbuds are common because it’s a sign of interference occurring from other devices.
To solve this issue, you can follow the following steps:
- Check if there are other Bluetooth devices present in the vicinity and turn them off.
- Ensure no appliances like microwave ovens, cordless phones, or Wi-Fi are present. You can turn off these appliances to know if that is causing the problem.
- Try to reset the earbuds to see if the static noise goes away. There is a detailed guide on the apple website on resetting your Beats Studio Buds.
- You can also try to turn the ANC on and off to see if the ANC is causing the static noise.
- If none of the above work, then take the earbuds to an apple store where they may fix the issue for you or replace the earbuds if they are still under warranty
Beats Studio Buds Static Noise In Right Ear
The reason for hearing static noise in the right ear of your Beats Studio Buds is due to interference from nearby Bluetooth devices.
All Bluetooth devices work at the same frequency, and some household appliances work at those frequencies. They interfere with signals and cause static sounds in the earbuds.
To fix this problem, take a look at the following steps:
- Turn off other Bluetooth devices that are close by.
- If that doesn’t stop the static noise, turn your ANC on and off to see if that is causing the problem.
- If the problem persists, you can try and reset your earbuds; this may resolve the problem.
- Finally, if none of these methods work, you should take the earbuds to an apple store for a replacement.
How Do I Turn On Noise Cancelling On Beats Studio Buds?
You can turn on the ANC on the Beats Studio Buds by holding the volume slider; once you see the noise controls, you’ll be able to turn the ANC on.
ANC feature in the beats studio buds is a phenomenal feature. It cancels out ambient sounds that it catches so that you can listen to just the sounds coming from the earbuds.
Follow the steps below to turn on the Active Noise Cancellation feature:
- Turn your earbuds on and connect them to the device you want to pair
- There is a volume slider that you need to hold
- Once you do this, you will see noise control options
- In the lower-left corner, you will see the noise control button
- Tap the noise control button
- You will see options for ANC, transparency, and off
- Click on ANC to turn it on
Why Is My Beats Studio Buds Anc Not Working?
If the ANC on your Beats Studio Buds isn’t working, it can be due to a firmware or hardware issue.
The active noise cancellation feature on the Beats Studio Buds ensures high-quality sound by eliminating ambient sounds from the surrounding. But if the ANC feature isn’t working, it can be quite disturbing.
Following the steps below to fix this issue:
- The first step is to check the firmware of the beats studio buds.
- You can do this by clicking the Bluetooth option, clicking on beats studio buds, and clicking on the information option.
- It will show you the current firmware and if there is a new firmware.
- Update the firmware and try the ANC feature.
- If the firmware isn’t the issue, reset the Beats Studio Buds. There is a detailed step-by-step guide on the apple website for this.
- Lastly, if the firmware and reset method doesn’t work, it could be a hardware issue. It would help if you took your buds to the apple store, where they can check the issue for you and resolve it or replace the buds.