Why does my Hisense TV have a black screen?
The main reason why a Hisense TV has a black screen is because of a faulty HDMI connection, a inadequate power source, or a faulty LED on the backlight.
If your Hisense TV is stuck on the black screen, you must reset it. Disconnect your television and wait 1 minute.
Press the power button key for 20 seconds while the TV is disconnected. After 1 min, reconnect your Hisense TV, and it should operate.
To repair a black Hisense TV, try power cycling it and inspecting the wires for breakage. If it doesn’t work, try hard resetting the TV.
Possible Causes
- Faulty connections
- Backlight issue
- Power Source
- Factory Reset
Faulty connections
If powering cycling your Hisense TV does not solve the problem, the very next step you should examine is your HDMI cables.
If you have something connected to your TV through HDMI, double-check the connections! That entails disconnecting them and then securely plugging them back in.
Backlight issue
If your Hisense TV is turned on (the power indicator is green, and you detect audio), but there is no image on display, it is most likely due to a malfunctioning LED power patch on the backlight.
To troubleshoot the problem, turn on the TV and put a spotlight (the flashlight on your phone would also work) near the TV’s screen. I recommend shutting off all lights to make it easier to view.
Power source
Your Hisense TV may go black if the power source to which it is attached does not provide enough power for the TV to come on and begin operating.
Factory Reset
If none of that works on your Hisense TV to restore it to working order, you may need to try factory resetting the TV.
If you do this, the TV will be restored to its previous settings, and you will be signed out of any accounts on the TV if it is a smart TV with applications.
How do I fix a Hisense TV black screen?
You can fix a Hisense TV black screen by first determining whether or not you are getting sound. You may use this data to select the best remedies.
Nevertheless, whatever the cause of this display problem, you may troubleshoot and repair it by following the methods below.
Possible Causes
- Faulty connections
- Backlight issue
- Power Source
- Factory reset
Faulty connections
Power and connection problems are simple to resolve, although they are the most prevalent causes. To debug and repair them, you should do the following:
- Examine the LED light that illuminates whenever the TV is turned on
- If the LED light is not on, check that everything is in working order and that all cords are properly hooked into the TV. If everything is in order, turn on the television
- If step 2 fails, change your cable box or any other device you’re attempting to utilize and see how it goes
Backlight issue
Check to check if the TV reacts to controls using the remote. I also recommend that you try the audio and input keys on the remote.
You may have to move the light around to discover the location of the TV’s user interface on the screen. If you hear auditory cues, you’ll almost certainly see a faint visual as well.
TV backlights are made up of strips of LED lights. Unless one of the lights in the strip fails, the whole strip fails.
It is simpler to replace the full strip than to repair a single faulty LED bulb. Backlight LED strips for your specific TV model may be ordered online.
Power source
Switch the power sockets over, and if you’re utilizing a power strip or a spike protector, connect the TV straight into the walls.
You may also determine whether your house receives high-quality electricity that is free of fluctuations and other problems.
If the electricity in your home fluctuates, wait a few moments before using the TV again.
Factory Reset
To completely reset your Hisense TV, follow these steps:
- Check the reset button on the TV’s base. It will resemble a tiny hole and be labeled reset
- Using a non-metallic pointed item, push and retain the button for about 20 seconds
- Pause until the TV resets, and then reinstall all of the programs you require
When the TV is ready, attempt to recreate the circumstances that caused the black screen the first time and see if the reset addressed these issues.
How to reset a Hisense TV with a black screen
To reset your Hisense TV with a black screen, press the exit button on the remote and wait for the factory settings menu to appear. Select ok and turn off the television.
Resetting your TV to a black screen is an extremely effective method.
If you are certain that it is necessary to reset your Hisense TV hard, these are the procedures to take:
- Press the EXIT button on your TV’s provided remote
- Wait for the Hisense TV factory service to show for at least 15 seconds
- Select OK
- Turn off the television
This strategy is only applicable to models manufactured after 2013. If you have a 2014 or later model, follow these steps:
- Press Menu on the included TV remote
- Select Support and then press Enter. It’s OK or Select in certain models
- Enter Self Diagnosis into the search bar
- Choose reset, which is the final choice
- Input your TV’s PIN to verify your request. The PIN is set to 0000 by default
Why does the Hisense TV screen goes black but the sound still works?
The reason why your Hisense TV screen goes black, but the sound still works could be because of input source issues, power outrage or other similar causes.
Users typically give Hisense great marks for its flawless color balance and acceptable HDR. Furthermore, it is a very worthwhile investment, with great features and reasonable rates when compared to other manufacturers.
The cause of occasional errors might now vary widely. It might be due to a malfunctioning T-CON board, a power outage, or anything else.
As difficult as it is to determine the exact reason, there are some broad strategies for troubleshooting a variety of such issues.
This final approach should restore your television to its original state. Using this procedure will erase any data saved on your television.
Passwords, usernames, and email addresses are examples. In any case, we urge that you use this strategy only as a last option.
Here are the methods for restoring your TV to its original state:
- On your Hisense TV remote, press the ‘Home’ button
- This brings up the home screen
- Navigate to the top of the screen and choose the settings icon
- On the remote, press ‘OK’ and then scroll down to the ‘Reset’ option
- Choose the selection and then click ‘Erase everything’
- This will restart your TV once it has been reset
Why is my Hisense TV screen flashing black on and off?
The reason your Hisense TV might be flashing on and off could be because of a variety of causes, such as an internal system fault or a problem with internet access.
The first step in resolving this problem is to restart your device. Please turn off the device, wait 30 to 60 seconds, and then turn it back on.
To restart the device entirely, disconnect it, wait 30 to 60 seconds, and then plug it back into the wall power source.
If this resolves the problem, the gadget only needs to be reset. If this does not resolve the problem, it is likely that your internet connection is weak and is producing the Hisense Roku TV error.
Check that your wireless Wi-Fi or other internet connection is properly installed and that the connection is robust.
Whether the connection is strong and the device has been reset, turn on your television for a few minutes to see if the problem has been repaired.
If not, the device may be experiencing hardware troubles. Examine your television to ensure that there are no visible damages. To restart the device, perform a factory reset. Keep this in mind.
All changes, passwords, and applications that have been downloaded to the TV will be erased and reset after a factory reset. A factory reset restores the device to its original factory settings, which were on your Hisense TV when it was initially obtained.