How to Stop the Volume Bar Popping Up On My TV Screen?

Why does the volume bar keep popping up on my TV screen?

The main reason why your TV volume bar keeps popping up on its own is because of a glitch in TV software or because the TV’s control board is faulty. Resetting the TV to factory settings can normally fix this issue.

 

Possible Causes

• The buttons on the TV remote are stuck
• Any fault in your TV remote
• An issue with the audio setting
• The TV’s control board is out of order

 

The buttons on the TV remote are stuck

Buttons on the TV remote are quite soft and can easily sink into the cavity in which they are held. One of the things that can help you identify stuck buttons is that they are mostly in a slant position. It is better to check your remote first if your TV acts weirdly or follows strange commands.

 

A faulty TV remote

A TV remote with faulty batteries may not perform well. Before you change the batteries, you should give a reset to your remote.

 

An issue with the audio setting

TV’s audio settings may cause certain malfunctioning to your TV, making the TV volume bar pop up now and then. It is best to check your device’s audio settings. Reset them if need be, or ask a technician to have a look.

 

The TV’s control board is out of order

Your TV’s faulty motherboard is capable of creating more nuisance than you may think. It makes the volume bar go up even when you have not given such signals. Replacing the control board is the best way to resolve the problem.

 

A glitch in TV software

If your TV software is not updated, it can cause problems, including the constant popping up of the TV volume bar. TV manufacturers notify users about available updates. You can install them to avoid such issues.

 

 

How to fix TV volume randomly goes up by itself?

To fix TV volume that randomly goes up by itself, check the TV’s software and make sure it’s updated, change bitstream, reset remote or revert your TV to factory settings.

 

Check TV Software [Method 1]

1. Go to the Home button.
2. Select the installation option.
3. Click on the Factory reset or first-time installation option.
4. Follow on-screen instructions to complete the process.

 

Change Bitstream [Method 2]

1. Go to Settings
2. Select the Sound, expert settings option.
3. Choose HDMI input audio format.
4. Change bitstream to PCM.

 

Reset Remote [Method 3]

1. Take out the batteries from the remote.
2. Press each key one by one on the remote.
3. Put new batteries.
4. Test to see if it is working.

 

Factory Reset [Method 4]

1. Click the Home tab.
2. Go to Settings.
3. Select General options.
4. Click on Reset to initial settings.

 

Always remember that the factory reset will erase all your data, including apps.

 

Reset the TV [Method 5]

1. Unplug the TV from the main power source.
2. Press the power button on the TV for around 15 seconds.
3. Re-plug the TV after at least 5 minutes.

 

Why is the volume popup stuck on my tv screen?

The reason your volume pop up is stuck on your TV screen is because of a glitch in TV software.

 

To resolve the problem:

1. Unplug the TV from the power socket.
2. Hold the power button on the TV for around 60 seconds.
3. Release the button.
4. Wait for at least 10 minutes and do nothing.
5. Connect the TV to the power socket again.
6. Also, remove the batteries from the TV remote.
7. Put them back on after waiting for about 10 minutes.

 

You can also resolve the issue by resetting the TV. These steps include:

1. Unplug the TV.
2. Press the power button on the TV for around 15 seconds.
3. Re-plug the TV after at least 5 minutes.

 

If these steps don’t work, you may get a technician to have a look at the TV’s motherboard. A faulty motherboard also causes these issues. In most cases, this component is usually unsalvageable, and you will have to get a new TV.

 

If you can claim a warranty, you should send your device to its manufacturer’s office and ask for a replacement.

 

How do I remove the volume bar on my TV?

To remove the volume bar from your TV, you should turn off the display for the bar.

 

Here is how it can be done:

1. Go to Setup.
2. Select System Settings.
3. Click on Auto Display.
4. Select On or Off.

 

The other method of turning off the audio description from your TV is changing the Voice Guide settings. This can be done as follows:

1. Go to Home.
2. Select Settings.
3. Click on General or Accessibility.
4. Select Voice Guide Settings.

 

If you have a Samsung TV, you can use the following methods to resolve the issue:

1. Press the MENU button.
2. Go to Sound.
3. Press Enter.
4. Click on Speaker Select.
5. Go to External Speaker.
6. Press Exit.

 

Unplugging the TV and leaving it without power is also a great way to solve the issue. For this:

1. Unplug the TV.
2. Leave it for at least 15 minutes; this step will let the voltage in the TV completely drain.
3. Remove all the screws on the back of the TV cover.
4. Remove the cover.
5. Locate the cable that links the main board to the control keyboard.
6. Gently pull it off.
7. Now turn the TV on with the help of the remote.

 

Important Tip: this step should not be done by inexperienced people. Taking off the case of the TV is not an easy feat. You need to do the work carefully to avoid any accidents.

 

Note: If these steps don’t work, you should take your TV to a service center and get the issue resolved. In some cases, you may need a replacement.

 

Why does the volume bar keep appearing on my Vizio TV screen?

The reason the volume bar keeps appearing on your Vizio TV screen is because of some issues in the firmware. If the cable is not properly connected, the TV will have some problems catching the signals.

 

Also, do check your remote to see if its buttons are in place. A stuck button often sends unwanted signals to your TV screen. To fix this problem, you can:

1. Update the TV’s firmware.
2. Go to the Audio menu of your TV.
3. Change Analog Audio Out to Variable.
4. If the problem doesn’t go away, consider installing an Optic cable.

 

Vizio TV users can also try these methods:

1. Go to Main Menu.
2. Click Audio Settings.
3. Select Advanced Audio.
4. Turn off SRS TruVolume.

 

Why does the volume bar keep appearing on my Roku TV screen?

The reason why the soundbar keeps popping up on your Roku TV screen is because of a glitch in its software. Updating your TV software will be the best way to get the issue resolved.

 

Also,a system reset is another solution to this problem. To do this, you will have to:

1. Press Home.
2. Go to Settings.
3. Choose System.
4. Click on System restart.
5. Restart on the Roku TV.

 

You can also try the following method to help resolve the issue:

1. Turn off the TV.
2. Hold the decrease volume button – or the minus sign.
3. Turn it on.

 

Why does the volume bar keep showing up on my LG TV screen?

The reason the volume bar appears on your LG TV screen is because the device doesn’t have the option to remove the channel identification. But the issue can be fixed, and the bar can be disabled.

 

Follow these steps to fix the issue:

1. Press Home.
2. Choose Setup.
3. Go to the Installation tab.
4. Click on Preferences.
5. Choose Channel information size.
6. Click on Classic.
7. Press OK.
8. Go to Back to exit the Home menu.

 

Why does the volume bar keep appearing on my Samsung TV screen?

The reason why the volume bar keeps appearing on your Samsung TV screen is because you have muted the TV using the remote’s button – the bar keeps reminding you that the volume has been turned off.

 

People who have been using Samsung HW-T650 have complained that the volume bar keeps appearing on the TV screen. This issue usually goes away when you mute the TV by using the volume button to bring down the volume level to 0.

 

To fix the issue:

 

1. Open Settings.
2. Choose General.
3. Select Reset.
4. Enter the pin (the default pin in 0000).
5. Select Reset.
6. Choose OK.

 

You can also try the soft reset of your TV to make the problem go away. This can be done if you:

1. Get the remote.
2. Press the power button.
3. Wait for the system to turn off.
4. Wait for 30 seconds to 1 minute.
5. Press the power button again.
6. Restart the television.

 

Samsung TV users will attest that the device has a new feature that lets it adjust the sound accordingly to the noise in the surrounding. This may lead to the volume bar popups on your TV screen. Follow these steps to fix it:

1. Go to Settings.
2. Choose General.
3. Go to Intelligent Mode Settings.
4. Select Intelligent Mode to turn all functions.