How to Fix Static & Buzzing Noise on Headphones

Why are my headphones making a weird noise?

Headphones can make a static buzzing noise becaue of loose electronics inside the casing, a damaged speaker, or  the activated noise cancelation feature has beeen enabled.

 

You can remove the hair, update the sound chipset driver and turn OFF the noise cancelation feature yourself. For hardware problems like fixing loose electronics and damaged speakers, it’s best to seek professional assistance.

 

Why are my wireless earbuds making a buzzing noise?

Your wireless earbuds are making a buzzing noise because of proximity to other wireless devices, a low battery, or outdated chipset drivers. A damaged speaker or Bluetooth interference signal can also cause a buzzing noise.

 

• Proximity to other wireless devices
• Low battery in the earbuds
• Outdated chipset drivers
• Damaged speaker in the earbuds
• Bluetooth interference signal

 

Proximity to other wireless devices

One common reason why wireless earbuds make a buzzing noise is that they are being used close to one or more electronic devices. The earbuds have to be used at a sufficient distance from these devices if they can’t be turned OFF.

 

Low battery in the earbuds

The low battery problem is another common reason why the buzzing persists. A low battery can pave way for audio dropouts while attempting to establish a seamless wireless connection. When the earbuds are fully charged, the buzzing will stop automatically.

 

Outdated chipset drivers

The buzzing noise is likely to get triggered if the chipset drivers are outdated and thereby not compatible with the earbuds. The buzzing will stop when the drivers are updated.

 

Damaged speaker in the earbuds

There is a possibility of the speakers integrated with the earbuds getting damaged due to an instance like playing loud music. The solution to this cause is buying new earbuds as that’s a better alternative than trying to fix the speaker.

 

Bluetooth interference signal

The buzzing noise may occur due to Bluetooth interference when the earbuds are used in an area where other Bluetooth devices are in use. Moving away from such devices should resolve the problem.

 

Can you stop headphones from buzzing?

Yes, you can stop headphones from buzzing. This can be done by ensuring that other electronic devices in close vicinity are turned OFF, the audio driver is updated and the audio settings in your computer are configured. You can also make sure that the audio port and cable function properly and replace the headphones.

 

 

How to fix buzzing noise on headphones

To fix buzzing noises coming from your headphones, updatethe audio driver, turn OFF other electronic devices, and configuring the audio settings of your computer. You can also check for the proper functioning of the audio cable as well as port or do a headphone replacement.

 

The steps outlined below help you fix the buzzing noise on your headphones:

1. Check if the audio driver of the speaker in your headphone is outdated or missing. This check can be done using Device Manager. If it’s missing, you’ll have to install the most recent version. If the existing driver is outdated, you can either do the update manually or automatically. The update can be carried out through the Device Manager window, with authorized software like Driver Easy, or directly from the manufacturer’s website.
2. Look out for other electronic devices near the surroundings. If the buzzing is due to frequency interference between the headphones and the other electronic devices, you can either turn OFF those devices or disconnect them from the power supply. The other alternative is to increase the distance between the two sources.
3. Make sure that the audio settings are configured properly on the computer. One setting that you must do is disable the audio enhancements. You can do this through the Control Panel window by clicking on Hardware and Sound followed by Sound. In the Sound window, select the speaker and click Properties. In the related Properties window, click the Advanced In the Signal Enhancements section, clear the Enable audio enhancements checkbox. Click Apply followed by OK.
4. Ensure that the audio cable and port associated with the headphone are working properly. You can check for the proper working of the audio port by connecting the headphone to another port. If the buzzing stops, the initial port is faulty and the cause for the buzzing noise.
5. Connect another headset to the computer and check if the problem stops. If the buzzing noise persists, the issue is most likely with the computer. On the other hand, if the buzzing stops, the headphone is defective and has to be changed.

 

How to fix static noise on headphones

You can fix a static noise on headphones by correcting the audio settings, tightening disconnected or loose wires, and ensuring that the auxiliary port is clean. You can also replace the headphone if the speaker is damaged and eliminate barriers between the headphone and audio devices.

 

The following steps help to get rid of static noise on your headphones:

1. Check the audio settings of the playback device that you’re using with the headphones. Try changing the settings and see if the problem is fixed.
2. Ensure that the headphone is connected firmly to the 3.5mm audio jack. This will solve the problem if the static noise is due to a loose connection. You must also check the wiring of the headphone for physical signs of damage. If you notice this, you will have to use another headphone.
3. Clean the audio auxiliary port of the playback device thoroughly to make sure that it’s free of dust and dirt. The dirt can cause oxidization inside the port and trigger static noise. When the port is clean, the static noise will stop.
4. Check for the possibility of a damaged headphone speaker by plugging it into an audio playback device that you know is in proper working condition. If you still hear the static noise, it’s a sign of a damaged speaker and you will have to opt for a headphone replacement.
5. Make sure that there is no barrier like a metal desk or interference from any other device when you use a wireless Bluetooth headphone.

 

How to fix clicking noise on headphones

You can fix a clicking noise on headphones by ensuring tight connections, connecting to the correct audio jack, or setting right a defective microphone. Cleaning the headphone scrims, replacing the worn-out cushions, and moving away from interference sources can also help to fix the problem.

 

The steps highlighted here offer a few simple hacks to eliminate the clicking noise on your headphones.

1. Make sure that the headphone cable is inserted firmly into its jack. A loose connection can pave way for the clicking noise.
2. Ensure that the headphone is connected to the right audio jack. The clicking noise may be because the headphone has been plugged into the wrong jack.
3. Check if the click sound occurs only when you use a microphone. If so, the problem is likely with the microphone and you’ve to get it repaired by a professional.
4. Clean the headphone scrims well to remove the blockages and make them free of debris. The static noise may be because of the blockage and debris.
5. Inspect the foam cushions of the headphone for signs of wearing out and replace them. Worn-out cushions will not attach firmly to the earcup and may trigger static noise.
6. Move the headphone away from sources of interference like power cords. In most cases, a small repositioning will help to get rid of the static noise.

 

How to fix crackling noise on headphones

You can fix a crackling noise on headphones by sealing the cracks in the headphone wires and straightening the headphone plug, replacing the blown-out driver, and resetting the Bluetooth connection. You can also update the sound drivers, change the standard audio format and adjust your EQ settings.

 

The steps outlined below guide you to fix the crackling noise on your headphones:

1. Check throughout the entire length of the headphone wire for signs of fraying or cracks and wrap electrical tape around such areas as tightly as possible.
2. Straighten the plug of the headphone by bending the jack gently until it’s straight. You will have to use a pair of thin pliers for holding the base and another pair at the tip. The straightening must be done carefully to avoid the plug getting damaged as it’s quite fragile.
3. Replace the blown-out driver by removing the earpad and the screws that keep the speaker in place. You will also have to disconnect the wires connected to the speaker to remove them with a soldering iron. It’s recommended to seek professional assistance if you’re not confident about doing the replacement yourself. The blowing out usually happens when you play music or any other audio at high volume often.
4. Reset the Bluetooth headphone if you have a wireless headphone. This will clear the cache and remove the crackling problem.
5. Update the sound drivers of your computer to their most recent versions using any one of the steps mentioned above.
6. Change the standard audio format by clicking the Advanced tab in the associated Properties window of the headphones as illustrated earlier. In the Default Format field, select a different sample rate and bit depth from the list.
7. Adjust the EQ settings by opening the Properties window of the headphone through Control Panel as explained above. Click the Enhancements tab followed by Equalizer and the … Adjust the slider till the crackling noise goes away.

 

How to fix high pitched noise on headphones

You can fix a high pitched noise on headphones by changing the sound settings, deselecting the device listening option, and updating the sound drivers. You can also do a troubleshooting process to solve the problem.

 

The steps that follow assist you in putting an end to the high pitched noise on your headphones.

1. Open the related Properties window by clicking on Properties in the Sound Click the Advanced tab and choose the highest option for the sample rate as well as bit depth in the Default Format section. Click Apply followed by OK.
2. In the Sound window, click the Recording tab and select the microphone. Click the Properties In the Microphone Properties window, click on the Listen tab. Clear the Listen to this device checkbox and click OK.
3. Open the Device Manager window and expand the Sound, video and game controllers Select a driver and right-click on it. Click the Update driver option. Do these steps for each driver listed under this node.
4. Press the Win and I keys simultaneously to open the Settings Click Update & Security and in the left pane, click Troubleshoot followed by Additional troubleshooters in the right pane. In the Get up and running section, click Playing Audio and then click the Run the troubleshooter button. Choose the problematic device and click Next to take the recommended actions.

 

Why is my left earbud making a buzzing noise?

Your left earbud is making a buzzing noise because of wireless disturbance, a bass-enhanced equalization in the music player, or user overload due to playing sound at high volume continuously. A blown-out or toasted driver can also cause a buzzing noise.

 

You can consider fixing the problem of the left earbud making a buzzing noise by following one or more of the steps listed below.

1. Make sure to seat yourself at a considerable distance from wireless devices if the buzzing sound is from a Bluetooth wireless headphone.
2. Select the headphone through the Sound window and then open its Properties Adjust the EQ slider by clicking on the Enhancements tab and then Equalizer followed by the … symbol.
3. Lower the volume at which the sound is being played. A high volume can cause overload, which in turn paves way for distortion.
4. Replace the headphone if none of the above steps help as it can be an indication of a blown-out or toasted driver. A high audio or volume level is a major reason for the speaker to get affected.

 

Why are my headphones buzzing when connected to my PC?

Your headphones are buzzing when connected to the PC due to a dirty front audio cable jack or electrical interference from other sources. A faulty electrical outlet can also cause the problem.

You can retort to any of the tips mentioned here to stop your headphone from buzzing when it’s connected to the PC.

1. Clean the audio cable jack and its port thoroughly to free them of accumulated dust and debris. The debris and dust accumulation can cause the headphone to get overheated and thereby start buzzing.
2. Turn OFF other sources of electrical interference that are located fairly close to the headphone. This can be anything like a Bluetooth keyboard or mouse or a Wi-Fi router. This method is particularly helpful with wireless headphone.
3. Connect the PC to another electrical wall outlet and check if the headphone stops buzzing. If it does, the problem is because of the earlier defective outlet and the headset has no problem.

 

Why are my headphones buzzing when playing games?

Your headphones are buzzing when playing games because of a problem with the sound card or electromagnetic interference.

 

You can try the following steps to arrest the buzzing noise in your Philips PH805 headphone.

1. Turn OFF the devices near your headphone that can cause electromagnetic interference. If this isn’t possible, you can increase the distance between the headset and such devices.
2. Use a digital-to-analog converter (DAC) to ensure the isolation of the sound system from electromagnetic interference.
3. Get a new PCIe sound card fitted onto the expansion slot of the motherboard in your computer.

 

If the buzzing problem occurs only when playing games, you can consider using a gaming dedicated USB headset as this is often equipped with its DAC inside it.