(SOLVED) Why PC Won’t Boot after Overclocking RAM?

Why my PC won’t boot after overclocking RAM?

The main reason why your PC won’t boot after overclocking RAM is because you have inserted the wrong RAM slots, the RAM sticks aren’t seated correct or the RAM is incompatible with the motherboard.

 

Possible Causes

• Incorrect Ram Slots
• Ram Sticks Not Correctly Positioned
• Ram Is Difficult To The Motherboard

 

Incorrect RAM Slots

Computers with four RAM slots will have some difficulty adding RAM. It is because you must follow particular combinations.

Failure to follow these combinations can cause a few issues with your computer’s operation.

For instance, if four slots are labeled 1, 2, 3, and 4, you must install RAM sticks into slots 1 and 2. If you put it in position 3 or 4, the computer will not function correctly.

 

Ram Sticks Are Not Correctly Positioned

The computer’s hardware should be installed correctly and with care. RAM sticks will not operate if they are not correctly set out.

As a consequence, the computer will continue to switch on and off. To avoid this problem, ensure the sticks fit exactly into their slots.

 

Ram Is Difficult To Connect To The Motherboard

Many computer users believe that all RAMs are interchangeable with all motherboards. This is not true.

If you recently installed RAM and discovered that the computer is still having issues, you should check to see if it is compatible with your motherboard.

 

 

How to fix a computer not booting after overclocking RAM?

To fix a computer not booting after overclocking RAM, replace defective RAM sticks, relocate RAM sticks or upgrade the RAM frequency.

 

Replacing Defective RAM Sticks

Faulty RAM sticks may disrupt your computer’s operation, requiring it to shut down.

This problem can be solved if you:

1. Find the defective stick.
2. Remove it and replace it with a fresh one.

 

RAM Stick Relocation

Improperly positioned RAM sticks might cause issues with your computer’s operation. How are you going to solve it?

The solution is found in the following steps:

1. Take the sticks out of their slots.
2. Replace them in the slots. Apply a bit extra force.
3. Check that the pins on the slot and the RAM sticks are securely connected.

 

RAM Frequency Upgrade

If you installed RAM incompatible with your computer, you would need to replace it.

1. Start the computer again.
2. Navigate to the BIOS. (You may go to the handbook with your computer to discover how to do this step.)
3. Navigate to the Advanced Chipset category.
4. Look up RAM frequency settings.
5. Please set it to a value that is compatible with your PC.
6. Select the Save and Exit options.

 

How to reset overclock RAM to default?

To reset overclock RAM to default, you must reset your BIOS.You’ll need to reset your BIOS so that the usual RAM settings are restored, and they can get back up and running.

 

You should examine your motherboard’s documentation for instructions, but one of the following should suffice:

1. Restart the machine three or four times.
2. After a few failed startup attempts, certain motherboards revert to default.
3. If appropriate, press the BIOS reset button on the motherboard.
4. If appropriate, bridge the BIOS reset jumper on the motherboard.
5. Replace the CMOS battery after removing it for a few minutes.
6. Everything should be back to normal when you reset the BIOS settings.
7. You will, however, need to review all the settings to ensure they are correct.

 

Why won’t pc post after overclocking RAM?

The reason why your PC won’t post after overclocking RAM could be because of a CMOS battery issue.

 

Your computer system’s fundamental engine is the CMOS battery. Any issues with the battery will create significant disturbances in the normally smooth operation of your computer.

 

You can use the following steps to correct the issue:

1. Remove any devices from which your PC is linked.
2. Turn off the power supply.
3. Remove the CPU’s lid.
4. Remove the battery.
5. After waiting at least five minutes, insert the battery; this will reset the battery.
6. Recover the CPU and reconnect all of the devices.
7. Turn on the power supply to test the battery.

 

Why my computer has no signal after overclocking RAM?

The reason why your computer has no signal after overclocking the RAM is because your PC is unable to keep up with the RAM’s new speed.

 

Overclocking harms the system’s health. In the worst-case scenario, it can cause system crashes and BSODs.

 

You can replace the motherboard to fix this issue:

1. Shut down your computer and disconnect all of the system’s wires.
2. To access the motherboard, open the side of your computer case.
3. Take a snapshot of the setting, so you don’t get confused while reassembling things.
4. Remove any other cards, such as graphics cards and Wi-Fi cards.
5. Disconnect the wires connecting your SSD, hard drive, and any media drives to your motherboard.
6. Disconnect your motherboard’s power cables and connectors, such as the 8-pin CPU power connector and the 24-pin ATX power connector.
7. Using a screwdriver, remove the screws that hold the motherboard in place. Keep the screws in a secure location.
8. Remove the motherboard from the case gently.
9. Remove the CPU cooler, CPU, and RAM from the motherboard since you will need to replace them on the new board.
10. Take extreme caution when removing the components since harsh handling may result in serious damage.
11. Install the components as mentioned earlier in the new motherboard.
12. Place your motherboard’s input-output shield at the rear of the casing.
13. Place the new motherboard gently in the empty shell. When you turn on the computer, use the motherboard’s standoff screws to keep it from frying.
14. Screw the screws into place to secure the motherboard. Connect the power connections and cords once again.
15. Insert the driver cords from your computer.
16. Replace the cards in their respective positions.
17. You can refer back to the snapshot you took at the start.
18. Reconnect your external cords and restart your computer.
19. Your computer may reboot two or three times. This occurs while the motherboard attempts to acclimatize to the working conditions.

 

Why does my pc have a black screen after overclocking RAM?

The reason why your PC has a black screen after overclocking RAM could be because it’s simply rebooting to apply settings or RAM speed is not compatible with the CPU.

 

After adjusting the RAM speed as part of the installation procedure, a computer may shut down. If the problem persists, the RAM may be incompatible with your CPU.

You may sometimes resolve these compatibility difficulties by upgrading the BIOS, deactivating PCI-e4 in the BIOS, or changing the RAM frequency.

If nothing else works, you’ll need to replace the CPU with a new one compliant with the RAM specs.

1. To update the BIOS, go to the manufacturer’s website and input your system’s details.
2. Press “Enter” and then choose “BIOS.”
3. Download the file and save it to your desktop.
4. Right-click the file name and select “Run as Administrator.”
5. To update the BIOS, follow the on-screen instructions.

 

Begin the BIOS setup by hitting the key or combination of keys your manufacturer gave to enter the setup to disable the PCI-E4.

1. Using the arrow keys or the “+”/”-” keys, navigate to the “PCI” or “Hardware” option in the configuration.
2. Change the PCI-E option status to “Disabled.”
3. Selecting the “Save and Quit” option may save the settings and exit the setup.

 

Why does my pc have a black screen after overclocking RAM?

The reason why your PC has a black screen after overclocking RAM is because your RAM slot may be defective.

 

To test the RAM slot, open the computer and examine each RAM slot using the following steps:

1. Remove all RAM modules from all slots.
2. Insert a functional RAM module into one of the slots first and see whether your machine boots up normally.
3. If the machine boots up without a problem, the RAM is OK.
4. Insert this RAM stick into the second slot, and so on.
5. Every time you try a new slot, restart your computer.
6. The RAM slot is fine if the computer boots up without any difficulties or failures.

 

Once you’ve identified the faulty RAM slot, proceed with the instructions outlined below to repair it:

1. Please turn off your computer and disconnect all of its components.
2. Follow the directions in the user’s handbook given by your manufacturer to open the computer case.
3. This is significant since each system has unique parameters depending on the manufacturer.
4. Check the RAM and make sure you gently remove the stick or card of the RAM from its slot.
5. You must use both hands and grasp the card tightly to remove the card.
6. Examine the RAM stick or card carefully for physical damage. If this occurs, you must change the RAM.
7. Make sure you also thoroughly clean the slot and RAM stick/card before moving on to the next step.
8. Replace the RAM card in the slot and reconnect everything.
9. Please turn on your computer and check to see whether it works.
10. If it doesn’t, you’ll have to replace the RAM slot.

 

Why is Windows 11 crashing after overclocking RAM?

The reason why your Windows 11 is crashing after overclocking RAM is because it may have damaged your drivers.

The frequent crashes might suggest a problem with device drivers. In other words, you may be running outdated or malfunctioning computer drivers.

This usually causes your system to become unstable after performing RAM overclocking, which frequently occurs following a system upgrade.

1. You should conduct a scan to ensure you have all the most recent and accurate drivers.
2. You may manually verify your drivers by visiting each manufacturer’s website.
3. Select the most recent accurate driver installer and installing step by step.
4. Restart your computer after upgrading your drivers to see if Windows 11 crashes again.

 

Why are games crashing after overclocking RAM?

The reason why games are crashing after overclocking RAM is because your CPU may have trouble processing the higher resolution and faster speeds.

After an unsuccessful overclock, you can reset the bios. The following are the methods for reversing the overclock using this method:

1. Access the Bios Setup Utility from the Windows starting screen.
2. You’ll be directed to which button to hit at startup to gain access.
3. Most computers use the Delete key.
4. Some of them do it with any F-keys from F1 to F12. In any case, be sure you’ve arrived at the BIOS settings and can access them.
5. To restore the factory defaults, press F9.
6. This will also return the overclocked CPU to its regular voltage condition.
7. When you hit F9, you will be asked to confirm the procedure.
8. To agree on the affirmative, press OK or ‘Y.’
9. The repair would begin upon confirmation.
10. Typically, resetting every BIOS option to default takes absolutely no time.
11. Please wait for it to finish on its own, then press F10 to save your changes.
12. It would return you to the starting screen or restart your computer.
13. After you’ve completed all of the above procedures, it’s time to see if the reset was successful.